Loading paper, Universal cassette, USA only

Loading paper

This laser printer supplies paper to the printer by feeding paper into the unit automatically from one of four universal cassettes.

Universal cassette

The universal cassette can be used to feed the following paper sizes: A3T, B4T, A4T/Y, A5T, B5T/Y, B6T, LedgerT, LegalT, LetterT/Y, ExecutiveT/Y, InvoiceT, 7 x 8 1⁄2". (T means lengthwise feeding and Y means crosswise feeding.) See Appendix A for more information on paper sizes. 350 sheets of paper can be loaded in each of the 4 universal cassettes.

NOTE: B5Y and B6T feed from upper 3 cassettes only.

1.Pull the universal cassette out as far as it will go from the cabinet.

USA only

Swing up the lift-up plate release lever to lower the paper lift-up plate in the cassette.

2.Change the switch position located on the rear right side in the cassette, depending on the paper size to be used.

Metric

Inch

Switch to “Metric” when paper size is A3T, B4T, A4T/Y, B5T/Y, A5T, or B6T.* All trays must be set to “Metric” if the previous paper sizes are used.

Switch to “Inch” when paper size is 11 x 17" (LedgerT),

8-1/2 x 14" (LegalT), 8-1/2 x 11" (LetterT/Y), 7-1/4 x 10-1/2" (ExecutiveT/Y), 5-1/2 x 8-1/2" (InvoiceT), or 7 x 8 1/2".* All trays must be set to “Inch” if the previous paper sizes are used.

*All trays must have the same size paper to use the Digital Workstation or Network Node AUTO feature.

2-2	November 1996 A-62032