Troubleshooting
Printed Results | Corrective Action |
Dirt on the top edge or back of the paper | Clean the inside of the printer. |
| Open the left cover 1 and check if the inside is dirty. If dirty, clean the |
| inside with the cleaning cloth included in the toner kit. |
Printing incomplete or out of position | Check the file or program. |
| Check whether the problem is being caused by a PRESCRIBE command |
| error. If the problem occurs only with a specific file or program, the most |
| likely cause is an error in a parameter to a command or command syntax. |
Color on the data and actual printout are different.
Perform color calibration.
Perform color calibration either by switching the printer off then on or using the printer operation panel.