Exit using the OK or Cancel button:
Clicking OK exits the Configuration Tool after applying the modified printer settings. Clicking Cancel exits the Configuration Tool without applying the modified printer settings.
Connecting and Printing
•
Exit using the Close button:
Click in the top-right corner of the Configuration Tool window.
•
Configuration Tool
The Configuration Tool allows you to check and/or change the settings for printers not included in the KX driver.
The Configuration Tool can be used for printers connected to the PC via a USB cable.
Note The contents of the Properties dialog box will vary depending on the installed optional devices, and whether the device is connected by a network interface or a local interface.
Accessing the Configuration Tool
Follow these steps to display the Configuration Tool on the desktop.
Note To configure the settings of the Configuration Tool, run the Status Monitor on your computer at first.
1 Right-click the Status Monitor icon in the Windows taskbar.
2 Select Configure the Printing System from the menu. The Configuration Tool window appears..
Note When the printer is connected with the network cables, COMMAND CENTER starts instead of the Configuration Tool.
Exiting the Configuration Tool
Use either of the methods listed below to exit the Configuration Tool.