Indicator
Maintenance Indication
The table below shows the indicator combinations when user intervention is required. It is assumed that the printer is online and is processing data.
Meaning | Remedy |
There is no paper in the cassette, | Load paper into the paper source. |
MP tray, or Manual Feed. |
|
|
|
The cassette is not inserted | Insert the cassette fully into the printer. |
properly. |
|
The top cover is open. | Close the cover. |
|
|
There is no cassette in the paper | |
feeder or the cassette specified as | printing again. |
a paper supply is not inserted |
|
properly. |
|
|
|
The process unit or toner | Install the process unit or toner |
container is not installed. | container. |
The cassette does not contain the | Load the paper into the cassette (#[1 or |
paper specified by the printer | 2]) and then restart printing. You can |
driver. | change the paper source by pressing |
| the [GO]. |
|
|
The paper sizes do not match. | If the paper size in the paper source |
| differs from the paper size and type |
| specified by the printer driver, you can |
| print by supplying paper from the MP |
| tray or Manual Feed. Load the correct |
| paper size and type into the MP tray or |
| Manual Feed and press [GO] to begin |
| printing. |
|
|
| If you want to supply paper from a |
| source other than the MP tray or |
| Manual Feed, you can change the |
| paper source by pressing [GO]. |
|
|
| If the paper fed from the MP tray or |
| Manual Feed is a different size from the |
| specified paper size, a paper jam will |
| occur. |
A paper jam occurred during | Open the printer cover and remove the |
printing. | jammed paper. |
Troubleshooting |