NEC MD213MC manual Controls, English-10

Page 12

Controls

The OSD (On-Screen Display) control buttons are located on the back of the monitor:

To access OSD menu, press the EXIT button. To change signal input, press the SELECT button.

NOTE: OSD must be closed in order to change signal input.

7

8

9

6

5

4

3

2

1

10

1

LED

Indicates that the power is on.

 

 

 

2

RESET

Resets the OSD back to factory settings.

 

 

NOTE: With no input signal on the screen, press RESET button for at least 3 seconds to

 

 

display the visual inspection (grayscale) drawing and check the display performance.

 

 

 

3

SELECT

Enters the OSD Control menu. Enters OSD sub menus.

 

 

Changes the input source when not in the OSD Control menu.

 

 

 

4

UP/DOWN

Navigates up or down through the OSD Control menu.

 

 

 

5

LEFT/RIGHT

Navigates to the left or right through the OSD Control menu.

 

 

 

6

EXIT

Access OSD menu. Exits the OSD sub menu. Exits OSD Control menu.

 

 

 

7

AMBIENT LIGHT

Detects the level of ambient light, allowing the monitor to make adjustments to various

 

SENSOR

settings. Do not cover this sensor.

 

 

 

8

FRONT SENSOR

Detects luminance changes over time. Used for standalone and network controlled

 

 

calibrations and conformance tests.

 

 

 

9

SENSOR PORT

For optional external sensor used for self calibration and copy calibration.

 

 

10 KEY GUIDE

The Key Guide appears on screen when the OSD control menu is accessed.

 

 

The Key Guide will rotate when the OSD control menu is rotated.

 

 

 

SETTING OSD LANGUAGE

¥Set the OSD language before using OSD functions.

¥To access the ÒLANGUAGE SELECTIONÓ menu, press control key (LEFT/RIGHT or UP/DOWN or EXIT).

¥Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language.

¥To exit from this OSD menu, press EXIT button.

NOTE: Setting the OSD language is only necessary upon initial setup. The OSD language will stay the same until changed by the user.

English-10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MD212MC MD213MC MD213MG Symbol Information IndexPower Cord Important Information Safety PrecautionIntended Use North America CustomersRegistration Information Safety Precautions and Maintenance Recommended useEnglish-3 Cleaning the LCD Panel Cleaning the CabinetErgonomics English-4Contents Quick Start English-6Monitor Figure E.1. Turn on the computer English-7Raise and Lower Monitor Screen Screen RotationTilt SwivelFlexible Arm Installation Remove Monitor StandMount Flexible arm English-9Controls English-10Auto Adjust Analog input only Luminance/Contrast ControlsImage Controls English-11Color Control Systems Only for MD212MC/MD213MC ToolsEnglish-12 Menu Tools English-13Information OSD WarningEnglish-14 How to use the advanced menu How to exit the advanced menuAdvanced OSD English-15Ntaa SW English-16Zoom Zoom POSEnglish-17 OFF Mode UniformityEnglish-18 Boot Logo Lock OUTDDC/CI English-19English-20 Calibration Self CalibrationEnglish-21 Copy Calibration ÒexitóEnglish-22 Gamma Adjust English-23Dicom Measurement English-24Specifications MD212MC Monitor Specifications MD212MC MonitorEnglish-25 Specifications MD213MC Monitor Specifications MD213MC MonitorEnglish-26 Specifications MD213MG Monitor Specifications MD213MG MonitorEnglish-27 Features English-28Troubleshooting Manufacturer’s Recycling and Energy Information Disposing of your old NEC productEnergy Saving Weee Mark European Directive 2002/96/EC

MD213MC specifications

The NEC MD213MC is a robust medical-grade display designed to meet the rigorous demands of healthcare environments. With a resolution of 2 megapixels, this monitor offers exceptional clarity and detail, essential for effective diagnosis and patient care. It features an active matrix TFT LCD panel that ensures superb image quality and consistency across various lighting conditions.

One of the standout features of the MD213MC is its high brightness level, which significantly enhances visibility and allows for clear viewing of images even in brightly lit examination rooms. The monitor supports a wide color gamut, ensuring that colors are reproduced accurately and that the display can handle diverse imaging applications.

The display is equipped with advanced medical imaging technologies, including a DICOM Part 14 compliance for grayscale images. This feature is crucial as it ensures that medical images, such as X-rays and MRIs, are displayed with the necessary contrast and brightness, assisting healthcare professionals in making informed decisions based on precise image analysis.

Another significant characteristic of the MD213MC is its ergonomic design. It includes a lightweight and slim profile, which makes it easy to mount in various clinical settings. The monitor can be adjusted for height, tilt, and swivel, enhancing the comfort of users during long hours of operation.

The MD213MC also incorporates an automated calibration feature that ensures consistent image quality over time. This is particularly important in medical settings, where even minor discrepancies in image display can lead to varying diagnostics.

Connectivity is another strong aspect of the NEC MD213MC. The monitor offers multiple input options, including DisplayPort and DVI, making it compatible with a wide range of medical imaging equipment. Additionally, the monitor includes USB ports for easy connection to peripheral devices, enhancing its versatility.

In terms of compliance, the NEC MD213MC adheres to stringent medical safety and performance standards, ensuring that it functions reliably in critical environments. Its combination of high-resolution imaging, ergonomic design, and advanced display technologies makes it an ideal choice for hospitals and clinics looking to enhance their imaging capabilities for improved patient outcomes. Overall, the MD213MC represents a significant advancement in medical display technology, providing healthcare professionals with the tools necessary for effective diagnosis and treatment.
Top Page Image Contents