NEC 750F manual Adjust the monitor height so that the top

Page 13

Recommended Use –continued

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:

Adjust the monitor height so that the top of

the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.

• Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 18 inches.

Rest your eyes periodically by focusing on an object at least 20 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other light sources to minimize glare and reflections. Adjust the monitor tilt

so that ceiling lights do not reflect on your screen.

If reflected light makes it hard for you to see your screen, use an anti-glare filter.

Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a non-alcohol, neutral, non-abrasive cleaning solution to minimize dust.

Adjust the monitorÕs brightness and contrast controls to enhance readability.

Use a document holder placed close to the screen.

Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing.

Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

¥Adjust the Brightness until the background raster disappears

¥Do not position the Brightness control to its maximum setting

¥Use the preset Size and Position controls with standard signals

¥Use the preset Color Setting and Sides Left/Right controls

¥Use non-interlaced signals with a vertical refresh rate between 70-85Hz for the AccuSyncª

¥Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast

For more detailed information on setting up a healthy work environment, write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations Ð ANSI-HFS Standard No. 100-1988 Ð The Human Factors Society, Inc. P.O. Box 1369, Santa Monica, California 90406.

11

AS750Fmanualfinal.p65

11

11/11/03, 2:16 PM

Image 13
Contents AccuSyncTM 750F Mise en marche rapide IndexFCC Information Canadian Department of Communications Compliance StatementContents Quick Start Connecting the Tilt/Swivel standRemoving the Tilt/Swivel stand Figure A.1 Pin mini D-SUB Captive Signal Cable Figure C.1 Power Outlet Power Cord ControlFunction ControlsControls Screen AdjustmentControls Degauss Recommended Use Safety Precautions and MaintenanceAdjust the monitor height so that the top DDC 2B SpecificationsFeatures Troubleshooting References Limited Warranty Declaration of the Manufacturer Informations FCC AvertissementLa bote de votre nouveau moniteur NEC AccuSyncMC contient ContenuRaccorder Socle Inclinable/Rotatif Mise en marche rapideDŽposŽe Socle Inclinable/Rotatif Figure A.1 Mini-fiche D-SUB ˆ 15 broches Mise en marche rapide -suiteMise en marche rapide -suite Commande Fonction CommandesRéglage de laffichage Commandes -suiteCommandes -suite Démagnét Consignes de sécurité et de maintenance Usage recommandéDU Positionnement DU Moniteur Usage recommandé -suiteFiche techniques Fonctions Dépannage Références Garantie limitée Déclaration du fabricant Série AccuSync NEC NEC AccuSync Series