Quick Start
Connecting the Tilt/Swivel stand
1.With the monitor unplugged from your system and the wall outlet, carefully turn the monitor down on a firm table
2.Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor.
3.Insert the hooks into slots.
4.Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position.
NOTE: For correct use of monitor, completely attach tilt/swivel base to the monitor.
NOTE: To avoid self injury or damage to the monitor, attach and remove tilt/ swivel base with care.
CAUTION: Make certain that the tilt/swivel base is locked firmly into place before turning the monitor upright.
Slot
Hook
Firm Table
Latch
Hook
Removing the Tilt/Swivel stand
1. With the monitor unplugged from your system and the wall outlet, carefully turn the monitor upside down on a firm table.
2. Push down on the latch of the tilt/swivel base and slide the tilt/swivel base backward from the front of the monitor.
3. Pull out the tilt/swivel base from the slots on the bottom of the monitor.
3
AS750Fmanualfinal.p65 | 3 | 11/11/03, 2:16 PM |