Lexmark N4000e manual Is shown in the list, 0020000035D0

What the list shows...	What this means...	What to do next...
Your print server with no MAC	Your print server is unconfigured.	1	Select My print server/printer
address appended.			is shown in the list.
For example:		2	Select your print server.
Lexmark_N4000e		3	Click Next.
		4	Enter the IP Address and other
			network information.
		5	Click Next.
			You are returned to the Print
			Server Setup screen, where
			your print server should now
			appear in the list as configured.
Your print server followed by a	Your print server is configured and	Is the printer name appended by a
printer name.	properly attached to a printer. It	port name?
For example:	may or may not need to be	For example:
	associated with a port before you
Lexmark_N4000e_0020000035D0		Lexmark_N4000e_0020000035D0
—E320	can print.	—E320-IP_Lexmark_N4000e_
		0020000035D0
		If so, the printer already has a port
		name associated with it, and you
		are ready to print.
		If not, do the following:
		1	Select My print server/printer
			is shown in the list.
		2	Select the printer.
		3	Click Next, and follow the
			instructions on the screen.
Your print server followed by the	Your print server is configured but	1	Make sure that the printer is
message “No Printer Attached.”	either you do not have a printer		turned on and that the print
For example:	attached to it or there is a problem		server is properly connected to
	with the printer.		the printer (check the USB
Lexmark_N4000e_0020000035D0
—No Printer Attached			cable).
		2	Select My print server/printer
			is NOT shown in the list.
		3	Select the first radio button.
		4	Click Next to search the network
			again.

Understanding the Setup Utility software

10