Lexmark manual An error message appears, Lexmark N4000e Setup Utility CD does not auto launch

An error message appears

Message	Solution
An error occurred while setting	Contact the Customer Support Center.
up your print server
Your print server has been	Launch your print server homepage on the Web to reset the password. To
password protected	launch the homepage, right-click your print server in the list, and then
	select Launch homepage.
	Note: You must know the current password in order to reset it.

The Lexmark N4000e Setup Utility CD does not auto launch

1Close all open software programs.

2Restart your computer.

3Reinsert the Lexmark N4000e Setup Utility CD.

If the setup utility screen appears, continue with step 11 on the Setup Sheet. If not, continue with the following steps:

a From your desktop, double-click My Computer. b Double-click the CD-ROM drive icon.

c If necessary, double-click setup.exe.

d Continue with step 11 on the Setup Sheet.

I don’t know which print server to select

If there are multiple print servers on your network, you can identify the one you are setting up by matching the MAC address

MAC address

to the twelve characters appended to the print server name in the list. For example, Lexmark_N4000e_0020000035D0.

An error message appears

13