Lexmark N4000e manual Setup, Requirements

Page 7

2 Setup

Requirements

For setup, you need:

•The Lexmark N4000e Print Server

•An existing Ethernet (10/100 Base TX) network

•An Ethernet (RJ-45, category 5) cable, purchased separately

•A network-capable printer

To find out if your printer is network-capable or for other printer-specific information, refer to the documentation that came with your printer or visit our Web site at:

http://support.lexmark.com.

•The Lexmark N4000e Setup Utility software CD

•The printer software CD that came with your printer

•A computer with a CD-ROM drive

The computer must be connected to the network, have TCP/IP active and running, and have one of the following operating systems:

•Windows 95

•Windows 98

•Windows Me

•Windows NT

•Windows 2000

•Windows XP

•Windows 2003 Server

Setup

7

Image 7

Contents N4000e Print Server Contents Glossary Trademarks Edition SeptemberElectronic emission notices Safety information Introduction Requirements SetupUnderstanding the Setup Utility software Connecting the hardwareIs not shown in the list Select My print server/printer0020000035D0 Is shown in the listSelect Perform an advanced search Select My print server/printer is not shown ListPower or USB indicator light is not on TroubleshootingStatus indicator light is on Select Launch homepage An error message appearsLexmark N4000e Setup Utility CD does not auto launch Don’t know which print server to selectSelect My print server/printer is not shown in the list My print server is not shown in the listMy printer is not shown in the list No Printer Attached My print server is unconfiguredMy network printer does not print Print a test Print a print server setupCheck the printer status Uninstall the Lexmark N4000e Setup Utility softwareVerify the network printer port Determine if my print server is configured Contact Lexmark Change the print server network settingsGlossary GlossaryLexmark International, Inc., Lexington Statement of Limited Warranty