Connecting the hardware
Follow all of the steps on the Setup Sheet that came with your print server.
Setup Sheet
Understanding the print server indicator lights
Power
USB Status
Power ( 
): This light indicates that the print server power supply is properly connected.
USB ( 
): This light indicates the printer and print server are properly connected by the USB cable and the printer is on.
Status (!): This light indicates a firmware error has been detected. If the light is on, see “Understanding the print server indicator lights.”
Understanding the Setup Utility software
If your print server/printer is shown in the list...
Your print server and attached printer may appear on the screen in a combination of the following states:
•Print server configured
•Print server unconfigured
•Printer associated with a port
•Printer not associated with a port
See the following table to determine the state of your print server and printer and what to do in each case.
Connecting the hardware
8