Lexmark S310 manual Using flash drives, Supported file types, Using a flash drive with the printer

About your printer 13

	Use	To
9	Cancel	• Cancel a print, copy, or scan job in progress.
		• Clear current settings or error messages, and return to previous
		settings.
10	Wi‑Fi indicator	Check the wireless status of your printer.
11	Eco‑Mode	• Change to Sleep mode after the printer is left idle for 10 minutes.
		• Reduce the screen brightness.
12	Back	• Return to the previous screen.
		• Exit from one menu level to a higher one.

Using flash drives

Supported file types

•.jpg, .jpeg, .jpe (Joint Photographic Experts Group)

•.tiff, .tif (Tagged Image File Format)

Using a flash drive with the printer

Make sure the flash drive contains files that are supported by the printer. For more information, see “Supported file types” on page 13.

1Insert a flash drive into the USB port.

Notes:

•The flash drive uses the same port that is used for a PictBridge camera cable.

•An adapter may be necessary if your flash drive does not fit directly into the port.

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

2Follow the instructions or select from available options on the printer display.

Note: If the printer does not recognize the memory device, then remove and reinsert it.