Lexmark S510-2222-00 Install memory and option cards, Removing the system board access cover

Page 32

Step 4: Install memory and option cards

Removing the system board access cover

CAUTION! If you are installing memory or option cards after initial printer setup, turn the printer off and unplug the power cord. If you have any other devices connected to the printer, turn them off as well and unplug any cables going to the printer.

You can customize your printer memory capacity and connectivity by adding optional cards or hard disk.

You must remove the system board cover to install memory cards, a firmware card, a hard disk, or an option card.

You need a number 2 Phillips screwdriver to remove the system board cover.

Rear cover

24 Install memory and option cards

Image 32

Contents Setup Guide Page Setup Guide Edition October Table of contents Index Introduction About your printerOther sources of information Publications CDSetup Guide Publications CD Quick Reference and sleeve Unpack your printerPaper size dial Considering environmental issues Select a location for your printerSelect a location for your printer Network and internet printers Select a location for your printer Printer with high-capacity feeder Set up the printer and paper handling options Topic Go toInstalling the printer base or cabinet Installing a 550-sheet drawer Positioning the printer Installing an optional duplex unit Set up the printer and paper handling options Set up the printer and paper handling options Installing an optional high-capacity feeder Attaching the docking frame Set up the printer and paper handling options Attaching the guide rail and feeder Set up the printer and paper handling options Set up the printer and paper handling options Installing height adjustment spacers Set up the printer and paper handling options Attaching the paper tray labels Install memory and option cards Removing the system board access coverScrews Use the following table to locate Installing a memory card Installing a firmware card Alignment pins System board holes Installing a hard disk Installing an option card Card FunctionInstall memory and option cards Install memory and option cards Reinstalling the system board access cover Attach cables Attach cablesAttach cables Local printing Install printer supplies Install printer suppliesRight top cover latch Install printer supplies Installing the photodevelopers Install printer supplies Install printer supplies Installing the toner cartridges Colored label Install printer supplies Attaching the Quick Reference booklet sleeve Attaching an adhesive operator panel overlay Closing the top cover Install printer supplies Load paper Well as for the multipurpose feederLoading the paper trays TraysLoad paper Load paper Load paper Load paper Using the heavy media tray Set the paper sizeSet the paper type Loading the multipurpose feeder Load paper Load paper Set button Loading the high- capacity feeder Load paper Load paper Load paper Verify printer setup Turning on the printerPrinting a menu settings Utilities MenuPrinting a network setup Configure for TCP/IP Setting the printer IP addressVerifying IP settings Configuring for Pull Printing Windows Install printer driversNetwork printing Macintosh Supported printer driversInstallation instructions Other network environmentsInstall printer drivers Page Finding information Distribute information to usersIdentifying printer users Distributing the information Storing the Quick CongratulationsIndex IndexIndex TCP/IP Page Readers’ Comments We’d Like to Hear from You Business Reply Mail Page Part Number 53P7114