Lexmark S510-2222-00 setup guide Alignment pins System board holes

Page 37

Warning! Firmware cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a card.

Alignment pins

System board holes

2 Unpack the firmware card.

Avoid touching the metal pins on the bottom of the card. Save the packaging.

3 Holding the card by its sides, align the pins on the card with the holes on the system board.

4 Push the firmware card firmly into place.

The entire length of the connector on the firmware card must touch the system board.

Be careful not to damage the connectors.

Install memory and option cards

29

Image 37

Contents Setup Guide Page Setup Guide Edition October Table of contents Index About your printer IntroductionPublications CD Other sources of informationUnpack your printer Setup Guide Publications CD Quick Reference and sleevePaper size dial Select a location for your printer Considering environmental issuesSelect a location for your printer Network and internet printers Select a location for your printer Printer with high-capacity feeder Topic Go to Set up the printer and paper handling optionsInstalling the printer base or cabinet Installing a 550-sheet drawer Positioning the printer Installing an optional duplex unit Set up the printer and paper handling options Set up the printer and paper handling options Installing an optional high-capacity feeder Attaching the docking frame Set up the printer and paper handling options Attaching the guide rail and feeder Set up the printer and paper handling options Set up the printer and paper handling options Installing height adjustment spacers Set up the printer and paper handling options Attaching the paper tray labels Removing the system board access cover Install memory and option cardsScrews Use the following table to locate Installing a memory card Installing a firmware card Alignment pins System board holes Installing a hard disk Card Function Installing an option cardInstall memory and option cards Install memory and option cards Reinstalling the system board access cover Attach cables Attach cablesAttach cables Local printing Install printer supplies Install printer suppliesRight top cover latch Install printer supplies Installing the photodevelopers Install printer supplies Install printer supplies Installing the toner cartridges Colored label Install printer supplies Attaching the Quick Reference booklet sleeve Attaching an adhesive operator panel overlay Closing the top cover Install printer supplies Well as for the multipurpose feeder Load paperTrays Loading the paper traysLoad paper Load paper Load paper Load paper Set the paper size Using the heavy media traySet the paper type Loading the multipurpose feeder Load paper Load paper Set button Loading the high- capacity feeder Load paper Load paper Load paper Turning on the printer Verify printer setupUtilities Menu Printing a menu settingsPrinting a network setup Setting the printer IP address Configure for TCP/IPVerifying IP settings Configuring for Pull Printing Network printing Install printer driversWindows Supported printer drivers MacintoshOther network environments Installation instructionsInstall printer drivers Page Identifying printer users Distribute information to usersFinding information Congratulations Distributing the information Storing the QuickIndex IndexIndex TCP/IP Page Readers’ Comments We’d Like to Hear from You Business Reply Mail Page Part Number 53P7114