Lexmark S510-2222-00 setup guide Install memory and option cards

Page 40

Note: The network, internet network, and duplex network printers ship with an Ethernet print server already installed.

Warning! Option cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch an option card.

You need a small Phillips screwdriver to install these options.

1 Remove the system board access cover (see page 24).

2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off.

Save the screw.

3 Unpack the option card.

Save the packing materials.

32 Install memory and option cards

Image 40

Contents Setup Guide Page Setup Guide Edition October Table of contents Index Introduction About your printerOther sources of information Publications CDSetup Guide Publications CD Quick Reference and sleeve Unpack your printerPaper size dial Considering environmental issues Select a location for your printerSelect a location for your printer Network and internet printers Select a location for your printer Printer with high-capacity feeder Set up the printer and paper handling options Topic Go toInstalling the printer base or cabinet Installing a 550-sheet drawer Positioning the printer Installing an optional duplex unit Set up the printer and paper handling options Set up the printer and paper handling options Installing an optional high-capacity feeder Attaching the docking frame Set up the printer and paper handling options Attaching the guide rail and feeder Set up the printer and paper handling options Set up the printer and paper handling options Installing height adjustment spacers Set up the printer and paper handling options Attaching the paper tray labels Install memory and option cards Removing the system board access coverScrews Use the following table to locate Installing a memory card Installing a firmware card Alignment pins System board holes Installing a hard disk Installing an option card Card FunctionInstall memory and option cards Install memory and option cards Reinstalling the system board access cover Attach cables Attach cablesAttach cables Local printing Install printer supplies Install printer suppliesRight top cover latch Install printer supplies Installing the photodevelopers Install printer supplies Install printer supplies Installing the toner cartridges Colored label Install printer supplies Attaching the Quick Reference booklet sleeve Attaching an adhesive operator panel overlay Closing the top cover Install printer supplies Load paper Well as for the multipurpose feederLoading the paper trays TraysLoad paper Load paper Load paper Load paper Using the heavy media tray Set the paper sizeSet the paper type Loading the multipurpose feeder Load paper Load paper Set button Loading the high- capacity feeder Load paper Load paper Load paper Verify printer setup Turning on the printerPrinting a menu settings Utilities MenuPrinting a network setup Configure for TCP/IP Setting the printer IP addressVerifying IP settings Configuring for Pull Printing Network printing Install printer driversWindows Macintosh Supported printer driversInstallation instructions Other network environmentsInstall printer drivers Page Identifying printer users Distribute information to usersFinding information Distributing the information Storing the Quick CongratulationsIndex IndexIndex TCP/IP Page Readers’ Comments We’d Like to Hear from You Business Reply Mail Page Part Number 53P7114