www.ezurio.com
Insulator | Material PA , beige natural |
Stacking height | 3.0 mm ; 3.5 mm ; 4.0 mm ; 5.0 mm |
Insertion force | 21.8N |
Withdrawal force 1st | 10N |
Withdrawal force 50th | 10N |
Maximum connection cycles | 50 |
12. Qualification
12.1Bluetooth Qualification Process
The following safety precautions must be observed during all phases of the operation, usage, service or repair of any application incorporating this Module. Manufacturers of the RF equipment are advised to convey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Ezurio assumes no liability for customer failure to comply with these precautions.
12.2Safety Information:
Switch off the Bluetooth device before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden by many airlines to prevent interference with communications systems. Applications that could result in use on aircraft should carry appropriate warnings.
12.3Qualifications
12.3.1RF approvals
The Module is listed as a Bluetooth Product in terms of the Bluetooth SIG Program Reference Document (PRD). This means that it can be integrated into end products without further testing or approval listing. The manufacturer must state the Ezurio part number and product reference in his literature in order to meet the requirements of the Bluetooth and regulatory approvals.
A list of the countries where the Module is approved will be provided by Ezurio as required. As a minimum the product is listed in Europe, Scandinavia and USA. Ezurio assumes no liability for customer failure to comply with national RF approvals.
12.3.1.1EMC Emissions
EN 300 328 V1.5.1
12.3.1.2EMC Immunity
EN 301
12.3.1.3FCC
FCC Part 15.247:2004 (Subpart C)
FCC ID: PI401B