Emerson XWEB5000 manual Right connection

Page 10

Right connection:

Right connection:

Figure 3

Wrong connection:

Figure 4

Always keep the serial cable away from power cables.

Always keep the serial cable away from Electro-magnetic or frequency sources. Do not connect shield to ground.

Do not connect the “Gnd (ground)” terminal.

Remember to draw a map of the line. This will help you to find errors if something is wrong.

The instrument with RS485 have “+” and “-“ terminals, respect the polarity.

To keep the line balanced it is necessary a 100 Ohm resistor at the end of the line (you ca use the RS 485+ and RS 485- terminals of the last instrument connected).

1592010860 XWEB5000 stp GB r1.1 2012.06.22.doc

XWEB5000

10/48

Image 10

Contents QUICK INSTALLATION GUIDEPage XWEB5000 1592010860 XWEB5000 stp GB r1.1 2012.06.22.doc3/48 Contents 1. CHECK LIST One blade and one cross screwdrivers Mouse PS2 2. INSTALLATIONoperator. Do not power the system Keyboard PS2Technical details 3. MAINTENANCE 4. RS 485 CONNECTION 9/48Right connection Serial address of the instruments The TTL output11/48 12/48 13/48 WINDOWS XP TCP/IP SETUP 14/4815/48 16/48 WINDOWS 7 TCP/IP SETUP Open ‘Network and Sharing Center’ Open ‘Network and Internet’18/48 19/48 20/48 21/48 6.Modem connection “or point to point connection” SETTING UP DIAL-UPCONNECTION FOR WINDOWS XP 23/48icon Connections24/48 25/48 26/48 27/48 5. Click Next 28/487. Select Connect to the Internet and click Next 29/4830/48 31/48 32/48 099555789or9,099555789. Click Next 34/48 35/48 36/48 SETTING UP DIAL-UPCONNECTION FOR WINDOWS 37/4838/48 Open ‘Set up a dial-upconnection’ Open ‘Set up a new connection or network39/48 40/48 41/48 42/48 7. Intranet / ethernet connection Internet connection 45/48 ping 8. Troubleshooting Guide192.168.0.200 9. Unit Setup Reminder Notes