Emerson XWEB5000 manual The TTL output, Serial address of the instruments, 11/48

Page 11

The TTL output

The instrument with RS485 on board does not need any kind of external interface module. For instruments with an external interface: keep the TTL cable away from power cables or frequency sources.

The XJ485 external interface must be connected with a TTL cable to the instrument with TTL compatibility.

Serial address of the instruments

Each instrument must be defined by its unique address.

Check the address into the Adr parameter value of each instruments. Take reference to the instruction manual of the instrument itself to find the right procedure to enter the programming and set the value.

The easiest way to work with the category functions is to set the addresses progressively for similar groups of instruments which have the same application.

1592010860 XWEB5000 stp GB r1.1 2012.06.22.doc

XWEB5000

11/48

Image 11

Contents GUIDE QUICK INSTALLATIONPage 3/48 1592010860 XWEB5000 stp GB r1.1 2012.06.22.docXWEB5000 Contents 1. CHECK LIST Keyboard PS2 2. INSTALLATIONoperator. Do not power the system One blade and one cross screwdrivers Mouse PS2Technical details 3. MAINTENANCE 9/48 4. RS 485 CONNECTIONRight connection 11/48 The TTL outputSerial address of the instruments 12/48 13/48 14/48 WINDOWS XP TCP/IP SETUP15/48 16/48 WINDOWS 7 TCP/IP SETUP 18/48 Open ‘Network and Internet’Open ‘Network and Sharing Center’ 19/48 20/48 21/48 6.Modem connection “or point to point connection” 23/48 SETTING UP DIAL-UPCONNECTION FOR WINDOWS XP24/48 Connectionsicon 25/48 26/48 27/48 28/48 5. Click Next29/48 7. Select Connect to the Internet and click Next30/48 31/48 32/48 099555789or9,099555789. Click Next 34/48 35/48 36/48 37/48 SETTING UP DIAL-UPCONNECTION FOR WINDOWS38/48 39/48 Open ‘Set up a new connection or networkOpen ‘Set up a dial-upconnection’ 40/48 41/48 42/48 7. Intranet / ethernet connection Internet connection 45/48 192.168.0.200 8. Troubleshooting Guideping 9. Unit Setup Reminder Notes