6.Modem connection (“or point to point connection”)
It represents the most common method where the LAN (intranet / Ethernet / internet) is not available.
It is strongly advised to use a dedicated telephone line.
IMPORTANT: Use exclusively modem devices approved by Dixell.
Remember that many modems are not compatible with Linux.
The list of compatible models can be found under the menu: ConFiguretion – System - Modem.
External Modem
Connect the External Modem to the serial Port on the back side using the modem cable commonly included into the modem packaging itself.
The modem reset is directly controlled by the XWEB3000 Server through the RS232 port by turning off and then on the modem device.
Connect the modem to the telephone line with the phone cable included into the modem packaging. Remember to check if there is a switching machine.
The connection procedure is divided in two parts. In the first part it is necessary to create the Remote Access, in your PC, set with the telephone number of the line where the XWEB3000 is connected to. You have to use Dixell as Username and Password.
The second is the procedure you will ever use: after launching the new Remote Access that will engage the line through the modem, start the Browser from your PC and insert the address http://192.168.1.200 into Explorer/Netscape address bar.
1592010860 XWEB5000 stp GB r1.1 2012.06.22.doc | XWEB5000 | 22/48 |