Internet connection

It is necessary to have a STATIC IP address for the XWEB3000 which is normally assigned by the Provider of your internet services (ISP).

The Internet connection allows XWEB3000 to be reached from all PC-clients. Insert the net address assigned by the administrator into the Browser address bar. Bookmark the address with personalised name for the future connections.

Ask your provider for more details about the rent of a the static IP.

This the internet system requirements for the best result:

Wide band connection.

At least 1 static IP addresses for the XWEB3000.

The internet connection is established through a device called Router that receives and sends the data as interface between an Intranet and Internet. The Provider also assigns the address of the router that is called IP WAN.

Remember that the default value of the IP of the XWEB3000 is: 192.168.0.200.

Depending on the contract the Provider can also supply the router, otherwise the user can buy it separately.

ALWAYS: ask qualified personnel for the router installation by using this information.

Used ports that are mapped to the LAN side:

80 (used for the HTTP access)

22 (used for SSH connection)

443 (used for SSL protected connection)

10000 (used for the internal modules of the system)

The above ports are all related to the XWEB3000 IP address 192.168.0.200.

While the ports on the WAN side are:

Telnet (to configure the router from a remote, also via Internet).

HTTP (To access the XWEB3000).

1592010860 XWEB5000 stp GB r1.1 2012.06.22.doc

XWEB5000

44/48