Hardware Preparation and Installation
2
2.1Overview
This chapter describes:
zUnpacking and inspecting
zPrecautions during the operation
zPreparations before installation
zInstallation procedure
zInstalling and replacing daughter cards
zConnection of external cables
zRemoval procedure
2.2Unpacking and Inspecting RTM-ATCA-7350
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the product can damage circuits or shorten their life.
Before touching the product or electronic components, make sure that your are working in an
Shipment Inspection
To inspect the shipment, perform the following steps.
1.Verify that you have received all items of your shipment: Printed "Getting Started" guide
RTM-ATCA-7350
Any optional items ordered
2.Check for damage and report any damage or differences to the customer service.
17 |