Preparations | Hardware Preparation and Installation |
|
|
zEnsure that your sleeves are tightened or rolled up above the elbow. For safety purpose, it is not recommended to wear jewelry, watch, glasses with metal frame, or clothes with metal buttons.
zDo not exert too much force, or insert or remove the components forcibly. Avoid damage to the components or
2.6.2Preparations
Before you install or replace a component, make the following preparations
zConfirming the feasibility of the operation
–There are available spare parts of the component to be installed or replaced in the equipment warehouse. When the available spare parts are in short supply, contact Emerson Network Power Embedded Computing for help in time.
–Make sure that the new component is in good condition, without defects such as oxidation, chemical corrosion, missing component, or transportation damage.
–By reading this document, you are familiar with how to install and replace the component and master the skills required by the operation.
zChecking the environment
Make sure that the shelf, power supply, temperature, and humidity meet the operating requirements of the blades and components. For details, refer to
zPreparing spare parts and tools
–Prepare the component to be installed or replaced.
When you hold or transport the component, use the special antistatic package. In addition, you need to tidy, record, and repair the component during routine maintenance.
–Prepare the cross screwdriver, screws, plastic supports, cooling gel, and ESD- preventive wrist strap.
The supplier provides a list of tools and negotiates with you to decide the tool provider.
zConfirming installation or changing positions
Confirm the positions of the cabinet, the shelf, and the slot where
zOthers
If a serious problem occurs and cannot be solved when you install or replace the component, contact Emerson Network Power Embedded Computing for technical support.
2.6.3GE Daughter Card
This manual considers the GE daughter card providing two external Ethernet interfaces as an example, and describes how to install the daughter card on and remove it from
25 |