1Unpack Your Disc Publisher
The following items are contained inside the box:
•Disc Publisher XR
•Gray Plastic Input and Output Bins
(Located in the Cardboard Insert)
•Switching Power Supply with Power Cord
•One
•One Monochrome Black Ink Cartridge
•QuickStart Installer Disc
•USB 2 Interface Cable
•Keys
•Warranty Card
•This Operator's Manual, Quick Start Guide and Other Printed Information
Save the carton and packing materials. They will come in handy later if you ever need to transport the Publisher and/or any of its parts and accessories.
TIP! Save the box and packing materials so that you can easily transport the unit if necessary.
4Applying Power
Be sure you have removed the packing tape and cardboard insert prior to applying power.
•Locate the power adapter supplied with your Disc Publisher.
•Place one end of the adapter cord into the power port on the rear panel of the Disc Publisher and the other end into a power outlet.
•Unit will initialize for approximately 30 seconds.
6Installing Ink Cartridges
•Press the Ink Cartridge (left) Button to move the Ink Cartridge Carrier to the load position and open the ink cartridge covers
•Remove each ink cartridge from its packaging
•Slowly remove the tape covering the
cartridge's print head, being careful to avoid damaging the barcode label on the underside of the cartridge.
DO NOT TOUCH
THE COPPER AREA!
•Insert the ink cartridges into the carrier, copper end first and snap the cartridge cover in place. Insert the color in the left holder, monochrome black in the right cartridge holder.
2 Installing the PC Software | 3 Installing the MAC Software |
5Loading Media (Discs)
Color Black
Pull out and lift up
The Installer Disc will guide you through the process of setting up your Disc Publisher. Please refer to the following for more informa- tion on each step:
1.Place the Disc
Publisher Installer CD in your
in a few moments. If it does, proceed to Step 2. If it does not
automatically launch, follow these steps:
•
•
2.In the Installer Application, click the Standard Install button. The Standard Install will guide you
Before installing the Mac software please note that all software must be installed on a hard disk. Once you have installed the software, store the original program
Please note that your user account must have administrative rights to properly install a new printer. You can check with your system administrator or check with Apple support to confirm whether or not your account has administrative rights.
Install the software as follows:
a. Insert the Disc Publisher Installation
b.
c.
d.The volume containing the operating system should be selected for installation. Click the Continue button. All components will be installed to their proper locations.
e.Once the installation has completed, click Quit.
You have successfully installed all the necessary software! Steps
Note on Media: Your Disc Publisher can print directly onto virtually any brand of
Due to the wide variety of
Refer to the following steps when loading discs in to the Disc Publisher:
•Open the front cover of the Disc Publisher
•The Disc Publisher will automatically posi- tion the cartridge carrier and Robotic Disc Transporter to the center position allowing for easy access to the bins.
•Load the Input
Bin (the bin located on the
Note: Bins are located inside the Cardboard Insert!
•Close and lock the Publisher’s front cover.
Note: The Publisher will not function unless the front cover is closed and locked!