Sanyo 85464359981002 installation instructions Installation space, Case of multiple installations

2-2. Outdoor Unit

AVOID:

●heat sources, exhaust fans, etc. (Fig. 2-5)

●damp, humid or uneven locations

DO:

●	choose a place as cool as possible.
● choose a place that is well ventilated and outside
	air temperature does not exceed maximum 113°F
	constantly.

Hot air

Out- door unit

Exhaust fan

Heat source

● allow enough room around the unit for air intake/

exhaust and possible maintenance. (Fig. 2-6)

● use lug bolts or equal to bolt down unit, reducing

vibration and noise.

Installation space

Distance between obstructions and the unit air inlet and outlet must be as shown below.

	*3
	Inlet side C
More than 25/64"	More than 25/64"
*2	*4

Outlet side More than 3.3 ft.

*1

Fig. 2-6

Fig. 2-5

(Obstruction above unit)

Air direction chamber (field supply)

	B
	A
*1	Inlet side
	More than 8 in.
	(Obstruction on
	inlet side)

(Ground)

Fig. 2-7

CAUTION

●Concerning inlet-side distance “C” (Fig. 2-6)

The minimum for distance “C” is 6 in. if there are no obstructions on the outlet side (wall *1 side) and *2 or *4 is not present. In all other cases, the minimum for distance “C” is 8 in.

●If the unit is installed with the outlet side facing wall *1, then there must be no obstruc- tions on 2 of the remaining 3 sides: *2, *3, *4.

●If wall *1 is on the outlet side (Fig. 2-6), or if obstructions are present on all 3 sides *2, *3, and *4 (Fig. 2-6), then the minimum distance for “A” and “B” is 6.6 ft. (Fig. 2-8). Even if there is no wall on the outlet side, a minimum of 3.3 ft. is required.

In case of multiple installations

●provide a solid base (concrete block, 4 ⋅ 16 in. beams or equal), a minimum of 6 in. above ground level to reduce humidity and protect the unit against possible water damage and decreased service life. (Fig. 2-8)

●use lug bolts or equal to bolt down unit, reducing vibration and noise.

Anchor bolts (4 pieces)

Fig. 2-8

18