(5)Before suspending the indoor unit, remove the 2 or 3 screws on the latch of the air-intake grilles, open the grilles, and remove them by pushing the claws of the hinges as shown in Fig. 3-95. Then remove both side panels sliding them along the unit toward the front after removing the 2 attachment screws. (Fig. 3-96)

(6)Carry out the preparation for suspending the indoor unit. The suspension method varies depending on whether there is a suspended ceiling or not. (Figs. 3-97 and 3-98)

(7)Suspend the indoor unit as follows:

a)Mount 1 washer and 2 hexagonal nuts on each suspension bolt as shown in Fig. 3-99.

b)Lift the indoor unit, and place it on the washers through the notches, in order to fix it in place. (Fig. 3-100)

c)Tighten the 2 hexagonal nuts on each suspension bolt to suspend the indoor unit as shown in Fig. 3-101.

NOTE

The ceiling surface is not always level. Please confirm that the indoor unit is evenly suspended. For the installation to be correct, leave a clearance of about 3/8" between the ceiling panel and the ceiling surface and fill the gap with an appropriate insulation or filler material.

(8)If the tubing and wiring are to go towards the rear of the unit, make holes in the wall. (Fig. 3-102)

(9)Measure the thickness of the wall from the inside to the outside and cut PVC pipe at a slight angle to fit. Insert the PVC pipe in the wall.

(Fig. 3-103)

Slide toward front side

Side panel

Fig. 3-96

 

Suspension bolt

 

(field supply)

Unit

Ceiling surface

 

 

Washer (supplied)

Fixture

Double nut

(field supply)

Fig. 3-97

 

Suspension bolt

 

(field supply)

 

Washer (field supply)

Unit

T

 

 

Washer (supplied)

 

Double nut

 

(field supply)

Fig. 3-98

Approx. 63/64"

Ceiling

surface

Washer

Nut

(supplied)

(field supply)

 

 

Suspension bolt

Fig. 3-99

Fig. 3-100

NOTE

Fig. 3-101

The hole should be made at a slight downward slant to the outside.

Indoor

Outdoor

side

side

Fig. 3-102

PVC pipe (locally purchased)

INSIDE

Wall

OUTSIDE

 

 

 

 

PVC pipe

 

 

Slight

 

 

angle

Cut at slight angle

Fig. 3-103

49

Page 48 Page 50
Page 49
Image 49
Sanyo 85464359981002 installation instructions Inside
Page 48 Page 50

85464359981002 specifications

The Sanyo 85464359981002 is a versatile and innovative product that has garnered attention in its respective market for its blend of performance, efficiency, and advanced technology features. This product is designed to cater to the demanding needs of consumers who prioritize quality and functionality in their daily lives.

One of the standout features of the Sanyo 85464359981002 is its energy efficiency. It is engineered to operate with minimal energy consumption while still delivering exceptional performance. This aspect is particularly significant given the growing concerns regarding energy usage and environmental sustainability. The model incorporates state-of-the-art technologies that optimize power usage without compromising on functionality.

The design of the Sanyo 85464359981002 focuses on user-friendliness and convenience. This product is equipped with an intuitive interface that makes it simple for users of all experience levels to operate and adjust settings as needed. Additionally, the lightweight construction enhances portability, allowing for easy transportation from one location to another.

Another notable characteristic is the advanced materials used in its construction. The Sanyo 85464359981002 is built to withstand the rigors of everyday use, ensuring durability and longevity. This quality makes it a smart investment for consumers looking for a reliable solution that won't require frequent replacements.

Connectivity is also a key feature of the Sanyo 85464359981002. It includes multiple ports and connectivity options that allow users to integrate the product with a variety of devices. This versatility enables seamless interaction with smartphones, tablets, and other technologies, ensuring that the Sanyo 85464359981002 can adapt to different environments and user needs.

The performance capabilities of the Sanyo 85464359981002 are impressive, emphasizing precision and speed. Whether it's delivering high-quality output or ensuring rapid operation, this product stands out in its field. These performance enhancements are supported by advanced technology that streamlines processes and improves overall productivity.

In conclusion, the Sanyo 85464359981002 exemplifies a well-rounded product that embodies modern design, energy efficiency, durability, and adaptability. Its array of features and advanced technologies makes it an attractive choice for consumers seeking quality and reliable performance in their daily routines.
Top Page Image Contents