(2) Check with a tape measure or carpenter’s level. This is important so that the unit is correctly installed. (Fig. 3-117)

(3)Make sure the panel is flush against the wall. Any space between the wall and unit will cause noise and vibration.

b) If the Wall is Brick, Concrete or Similar

Fig. 3-117

 

Drill 3/16" dia. holes in the wall. Insert Rawl plugs for appropriate mounting screws. (Fig. 3-118)

3-32. Removing the Grille to Install the Indoor Unit

In principle, with this model wiring can be completed without removing the grille.

However, if it is necessary to change the settings on the PCB, follow the procedure below.

Removing the grille

(1)Lift up on both sides of the air-intake grille to open it. (Fig. 3-119)

(2)Remove the filter. (Fig. 3-119)

(3)Adjust the flap so that it is horizontal. (Fig. 3-120)

(4)Open the installation screw covers below the grille (3 locations). (Fig. 3-120)

(5)Remove the screws. (Fig. 3-120)

(6)Remove the grille. (Fig. 3-121)

Attaching the grille

(1)Close the flap.

(2)Keep the grille installation tabs aligned with the top portion of the grille, and reinstall the lower portion of the grille.

Fit the installation tabs into the grooves and press the lower portion of the grille back into its original position to install it.

3/16" dia. hole

Rawl plug

Fig. 3-118

Intake grille

Filter

Flap

Open the grille

Fig. 3-119

K

Installation screw cover

(3)Press on the installation tabs to completely close the grille. Check that the grille and frame are fitted tightly together.

3-33. Preparing the Tubing

(1)Arrangement of tubing by directions

a)Right or left tubing

The corner of the right or left frame should be cut with a hack saw or similar. (Fig. 3-122)

b)Right-rear or left-rear tubing

In this case, the corners of the frame do not need to be cut.

Fig. 3-120

Remove the grille

Fig. 3-121

(2)Be sure to insulate the part of the drain hose that is run indoors, and the refrigerant tubing.

If these are not insulated, condensation may result in dripping and damage to walls and furniture.

The flare nuts on the 24-type (only) are large; therefore, use the supplied insulation material.

Installation tabs

Frame

Right tubing outlet

Installation tabs

When left and right side tubing

Fig. 3-122

Fig. 3-123

53

Page 52 Page 54
Page 53
Image 53
Sanyo 85464359981002 If the Wall is Brick, Concrete or Similar, Removing the Grille to Install the Indoor Unit
Page 52 Page 54

85464359981002 specifications

The Sanyo 85464359981002 is a versatile and innovative product that has garnered attention in its respective market for its blend of performance, efficiency, and advanced technology features. This product is designed to cater to the demanding needs of consumers who prioritize quality and functionality in their daily lives.

One of the standout features of the Sanyo 85464359981002 is its energy efficiency. It is engineered to operate with minimal energy consumption while still delivering exceptional performance. This aspect is particularly significant given the growing concerns regarding energy usage and environmental sustainability. The model incorporates state-of-the-art technologies that optimize power usage without compromising on functionality.

The design of the Sanyo 85464359981002 focuses on user-friendliness and convenience. This product is equipped with an intuitive interface that makes it simple for users of all experience levels to operate and adjust settings as needed. Additionally, the lightweight construction enhances portability, allowing for easy transportation from one location to another.

Another notable characteristic is the advanced materials used in its construction. The Sanyo 85464359981002 is built to withstand the rigors of everyday use, ensuring durability and longevity. This quality makes it a smart investment for consumers looking for a reliable solution that won't require frequent replacements.

Connectivity is also a key feature of the Sanyo 85464359981002. It includes multiple ports and connectivity options that allow users to integrate the product with a variety of devices. This versatility enables seamless interaction with smartphones, tablets, and other technologies, ensuring that the Sanyo 85464359981002 can adapt to different environments and user needs.

The performance capabilities of the Sanyo 85464359981002 are impressive, emphasizing precision and speed. Whether it's delivering high-quality output or ensuring rapid operation, this product stands out in its field. These performance enhancements are supported by advanced technology that streamlines processes and improves overall productivity.

In conclusion, the Sanyo 85464359981002 exemplifies a well-rounded product that embodies modern design, energy efficiency, durability, and adaptability. Its array of features and advanced technologies makes it an attractive choice for consumers seeking quality and reliable performance in their daily routines.
Top Page Image Contents