TOC | INDEX |
C. IDENTIFYING THE PARTS
This illustration shows the front of the printer with its control buttons and LED indicator lights.
| Top Cover |
Pause Button | Pause LED |
| |
Power LED |
|
Load/Feed |
|
Button |
|
Ink Low LED |
|
Unload Button | Label Tear Bar |
The Pause Button pauses the printer AFTER the printing of the current label has finished to allow for loading of label stock and ink cartridges.
The Pause LED is lit when the printer is paused. Press the Pause Button to resume printing.
The Power LED indicates that the printer is on and ready to receive print jobs.
The Load/Feed Button is pressed in order to load label stock or form feed the label stock through the printer.
The Ink Low LED will illuminate when a cartridge has 10% or less of its ink remaining.
The Unload Button will unload the installed label stock by reversing it through the printer. Make sure to tear off the print- ed labels before pressing the Unload Button.
NOTE: Always use this procedure to unload label material. DO NOT ALLOW THE END OF THE ROLL TO FEED THROUGH THE MACHINE!
The Label Tear Bar is a serrated edge for conveniently tearing your finished labels from the printer.
WARNING. Sharp Edges. Keep fingers and other body parts away from the
Getting Started 3