Lanier 5618 manual System Settings, Menu Description

		System Settings
System Settings
	Menu	Description
	1. Function Priority	You can specify the mode (Copier, Fax, Printer) to be
		displayed immediately after the operation switch is turned
		on or System Reset mode is turned on.
		Default: Copier
	2. Copy Count Display	The copy counter can be set to show the number of copies
		made (count up) or the number of copies remaining to be
		made (count down).
		Default: Up (count up)
	3. System Reset	The machine returns to its prioritized mode automatically
		after your job is finished, after the selected time. This
		function is called “System Reset”. The time can be set
		from 10 to 999 seconds, or no system reset.
		You can specify the prioritized mode with the user tools.
		Default: On (60 seconds)
	4. Energy Saver Timer	The machine enters Low Power mode automatically after
		your job is finished, after the selected time. The time can
		be set from 1 to 240 minutes.
		In Low Power mode, power consumption is reduced by
		30% compared with Standby mode. This value applies to
		copier features only.
		Default:15 minutes
	5. Energy Saver Level	You can select the Energy Saver level.
		Level 1
		Power consumption is reduced by about 30%
		compared standby mode.
		Warm-up time is about 10 seconds.
		Level 2
		Power consumption is reduced by about 60%
		compared standby mode.
		Warm-up time is about 15 seconds.
		Level 3
		Power consumption is reduced by about 70%
		compared standby mode.
		Warm-up time is about 20 seconds.
		These values apply to copier features only.
		Default: Level 1

User Tools Settings 5 - 3