Lanier 5618 Copy Paper, Copy Quantity, Copy Size Keys, Darker Copies, Developer Material, Tray

Page 96

Copy Paper	See: paper
Copy Quantity	This display or part of a Touch Screen shows the requested number of
	copies.
Copy Size Keys	Keys used to input the desired size of the copy.
Darker Copies	This term refers to the amount of toner placed on the copy through the
	imaging process. The amount of toner is controlled by the “darkness” of
	the original and the amount of light used during the exposure process;
	more light means less toner or image density.
Developer Material	This is a supply used in the copier. It usually consists of two parts; a
	carrier material and the toner. The developer material is only used by a
	technician when installing a new unit or when cleaning a Developer Unit.
Developer Unit	An assembly located near the drum inside the copier that delivers the
	toner to the drum. It allow the correct amount of toner to be placed on the
	drum for each image.
Document Feed Tray	The Tray where an original document is placed to feed into an ADF for
	automatic feeding and copying.
Document Guide	These Guides are located in the Document Feed Tray. When correctly
	positioned against the sides of an original document, they help to position
	the pages of the document.
Document Receiving	A Tray used to accumulate the pages of an original document that have
Tray	completed the copying process.
Document Scale	Two scales located to the front and left of the Exposure Glass intended to
	help locate original documents placed on the Glass for manual copying
	and to identify a part of an original during the Editing process.
Documents	The set of pages either placed on the Exposure Glass or in the ADF to be
	copied.
Drum Assembly	The unit located inside the copier that receives the image during the
	exposure and imaging process and transfers this image to the copy paper.
	It is light sensitive and should be protected from bright lights.
Energy Saver Key	A Key used to place the copier into, or bring it out of an Energy Saver
	Mode. In the Energy Saver Mode, the amount of energy consumed by the
	copier is reduced.

G-2

Image 96

Contents 5618 Lanier Worldwide, Inc. September Table of Contents Table of Contents Copying Methods Index Table of Contents Important Safeguards Important Safeguards Making Copies Chapter Overview Applying Power Main Power SwitchOperation Key Selecting the Mode of Operation LimitationsMaking Copies Copy Options You Can Select Methods To Use For Copy Options Component Identification Component Identification Control Panel Fax/Printer/Copier Control PanelLeft & Right Cursor Keys Full Size Key Component Locations Front Platen Cover or Document Feeder optionalOperation Panel Component Locations Rear Bypass TrayStatus Display Indicators Paper MisfeedGraphics Display Bottom lineCopier Functions Copier Functions Entering User Codes Precautions when using Document Feeders Document FeederRadf Feeding Stack of Originals Using Auto Start Selecting Copy Quantities Using Auto Image Density Mode Using Manual Exposure ModeSelecting Copy Darkness Modes Selecting Original Modes TextPhoto Using Auto Paper Select Selecting Copy PaperUsing Manual Paper Select Using Auto Reduce/Enlarge Enlargement and Reduction RatiosUsing Preset Copy Ratio Keys Zoom Keys Sort PadAuto Off Timer Energy Saving ModesDisplay Contrast LevelCopying Methods Copying Methods Bypass Copying When Copying onto OHP Transparencies When Copying onto Non-Standard Size Paper Duplex Copying Sided to 2 SidedWhen Setting the Copy Direction Sided to 2 Sided Combine Copying Portrait Originals Landscape Originals Press the Combine/ Series keySet your originals Then press the Start key Series Copying Book to 1 SidedSided to 1 Sided Sided to 1 Sided Series Copying User Tools Settings User Tools Settings System Settings Basic Steps to Accessing System SettingsExiting from User Tools Printing the Counter Value System Settings Menu DescriptionAn error message is displayed Display Copier Feature Settings Basic Steps to Accessing Copier Feature SettingsCopier Features Number of copies made under the old code is added Service and Supplies Service and Supplies Loading Paper Changing Paper Size Changing Paper Size Changing Paper Size Setting Non-Standard Size Paper When the Paper Size Required is not DisplayedChanging the Toner Cartridge Changing the Toner Cartridge Clearing Paper Misfeeds When the Machine Does Not Operate Properly DisplayMessage When Copies are Not Clear Problem Cause ActionCan Not Make Proper Copies CombineDuplex Cleaning the Copier Cleaning the MachineCleaning the Exposure Glass Cleaning the Document Feeder BeltCleaning the Copier Cleaning the Copier Specifications Specifications Main Copier Unit Copy paper weight Copy paper sizeNon-reproduction area First copy timePower requirements Power consumptionDimensions W x D x H up to exposure glass Noise Emission ISO7779 Sound Power LevelDocument Feeder option Tray System Stand option Available paper sizePaper capacity 16MB Copier Memory Unit option Memory capacityAdditional functions Number of originals that can be storedAgency Certifications Canada RFIEPA Energy Star Paper Sizes Type Paper SizeEnlargement and Reduction Percentages Type Inch Version Metric VersionGlossary Definitions for the most often used terms are listed here Copier Terms Drum Assembly Copy PaperCopy Quantity Copy Size KeysFactory Default Fuser AssemblyFuser Cleaning Pad Energy StarInitial Settings On/Stand by SwitchIndicator Paper WeightPower Cord Ready IndicatorRelease Lever Separation CoronaToner Container TransparenciesTransport Belt User CodesIndex Use this index to find items used in this Operator Guide Index Terms USA RFIPage New Machine Warranty and Limitation of Liability Warranty 90 daysCustomer Vision Our commitment to your Complete satisfaction