Philips ADM0101 installation instructions Adim Configuration, Logging on and User Levels

5 ADIM CONFIGURATION

The ADIM software is pre-loaded. No software installation is required.

Open the ADIM Application by double clicking the ADIM icon on your desktop.

5.1Logging ON and User Levels

• Log in with a user name and password.

•If configuring the system, logon as a user with Installer or Administrator privileges. This grants access to all areas.

NOTE: The ADIM’s user name and password are the same as the Master Control Software for Windows.

•User levels for ADIM and Master Control Software for Windows:

User Level	Default User	Default	Areas of Access
	Names	Passwords
Installer	Installer	1	Status, Monitoring
			& Configuration
Administrator	Administrator	2	Status, Monitoring
			& Configuration
Operator	Operator	3	Status, Monitoring

NOTE: The PC is pre-configured to automatically log into Windows NT and start the ADIM application. ADIM can be configured to automatically log in, bypassing the log in dialog.

This allows automatic start up of the ADIM application when the PC is restarted.

1. Select or create an Allegiant Server document.

NOTE: ADIM will automatically open the last Allegiant document, therefore this screen may not be seen.

2.If creating a new Allegiant document, select the type of Allegiant:

3.The ADIM Status and Monitoring screen is displayed as shown in Figure 5.1.

Figure 5.1

12