Philips ADM0101 Appendix C Recommended Network Switches, Appendix D List of Compatible Dvrs

APPENDIX C – RECOMMENDED NETWORK SWITCHES

Approved and tested network switches for use with ADIM.

•3Com SuperStack 4300 model

APPENDIX D – LIST OF COMPATIBLE DVRS

•Hi-Q Series (DVRRT4, DVRRT4EP)

APPENDIX E – PRIMARY, BACKUP, AND REVIEW DVRS

Primary:

DVRs on the input of the Allegiant

Backup:

DVRs used on the output of the Allegiant. When ADIM determines a problem with a Primary DVR, the cameras designated for that Primary DVR are switched over to the Backup DVR for recording.

Review:

DVRs used on the output of the Allegiant. These DVRs are used to record all video from a switched output of the Allegiant. The Review DVRs are useful when reviewing an incident/suspect that involved multiple cameras being switched to a specified Monitor. It is also useful to review alarm / event video from the output of the Allegiant.

•Using the Keyboard to Playback Video from the Review DVR:

1.Select the Monitor you wish to review

2.Select camera number that corresponds to the Hi-Q’s MON A output that is connected to the Allegiant Input. (In Figure below this would be camera number 29)

4 3 2 1

29	Input
	ALLEGIANT Video Matrix		PHILIPS
	Monitor Outputs
	10 11	12 13

23