Adim

Typical System:

Disk Array

Video

Inputs

Network Switch

	Allegiant	Back-up Recorder
	Video	Monitor Outputs
	Loop-through	Monitor Outputs
	Loop-through
	ALLEGIANT Video Matrix	PHILIPS

Review Monitor

Recorder

PHILIPS

LAN

Network

Serial Hub

Maximum of 6 Keyboards

IMPORTANT NOTES:

•Disk Arrays are optional. (See specific DVR for Disk Array options.)

•Additional Serial Hubs may be used for remote keyboards.

•The ADIM system can handle a maximum of 6 keyboards; additional Keyboards may be connected to the Allegiant for live monitoring and camera control.

•ADIM can only be used with compatible Philips DVRs. (See Appendix D.)

•Only one user at a time can access a particular DVR. To avoid situations where high priority cameras are not accessible for playback, avoid placing more than one high priority camera on each DVR.

•The ADIM supports only one Allegiant system. The Allegiant

may be a master in a satellite configuration, with DVRs at both master and satellite sites.

•Ensure the Allegiant has sufficient inputs for all cameras, DVR MON A outputs and optional Backup DVR MON A outputs.

•Ensure the Allegiant has sufficient outputs for all Backup DVR inputs.

•This system is designed to operate on its own closed network.

•The ADIM PC does not take the place of the 8900 Series PC. An LTC 8900 Allegiant System will still require its

LTC 8943/92 PC.

•The DVRs can be configured as Review Monitors, providing playback capability only for cameras that were directed to the specific monitors.