Philips ADM0101 installation instructions Status and Monitoring

6.3Status and Monitoring Page

Table Element	Explained	Field Values
Hi-Q number	Fixed field depending on where the Hi-Q	1 - 800
	is entered into the table
Hi-Q Type	Determines configuration of the Hi-Q in the	Primary, Backup, Review Monitor
	system	(See Appendix E for more details)
	Indicates operational status of a Hi-Q:	Primary:
		On-Line (Green),
	On-Line and operational (Green);
		Off-Line (Red)
Hi-Q Status	Off-Line (Red);
		Backup:
	Back-up unit that is currently backing up
		Available (Green), Backing up a
	a primary Hi-Q (Yellow)
		Primary Hi-Q (Yellow)
Hi-Q Input Number	Physical inputs on the Hi-Q.	1 through 4
	If a Backup Hi-Q is Backing up a Primary Hi-Q, this
	field indicates the logical camera numbers that are
Allegiant Logical Camera Number	being recorded by the backup Hi-Qs. For Primary	1- 9,999
	Hi-Qs, this is simply the logical camera attached to
	the Hi-Q.
	Field is gray when the associated Hi-Q is	OK (green)
Camera Status	Off-Line, or if the Hi-Q is a Backup Hi-Q in the
		NO Sync (red)
	Available state.
BUTTON: Switch video from selected	This can be used to perform maintenance or repair
	on a Hi-Q without loosing any recording. To
Primary Hi-Q to a Backup Hi-Q
	manually switch cameras to backup Hi-Q, first
	select a Hi-Q, then press this button.
BUTTON: Set Selected Backup Hi-Q	Frees up a Backup DVR that’s currently in use.
	This DVR can subsequently be used to backup
to “Available”
	another DVR. First, ensure that the primary Hi-Q
	is operating and On-Line, then select the Backup
	Hi-Q and press this button.
BUTTON: Silence Beep	Silences the ADIM PC alarm (beep).
BUTTON: Add Manual Event Message	Allows a user to manually add a message to the
	Event Log.
ADIM Messages	Displays the most recent information, warning,
	and error events.
	The Open File dialog box is displayed.
BUTTON: Open Log File	The log file names indicate the day.
	(See Figures 6.1a & 6.1b)
Allegiant On-line	The lower right-hand corner of the screen	Green = On-Line
	indicates On/Off-Line status of the Allegiant.	Red = Off-Line

15