Philips 288P6LJEB Press MultiView in OSD menu, When the sub source is not Detected, Source

2. Setting up the monitor

How to enable MultiView by hotkey?

1.Press the hotkey directly on the front bezel.

2. The MultiView selection menu appears.

PMulti View

PiP

PbP

Swap

Off

3.Press

and then exit automatically.

How to enable MultiView by OSD menu?

Besides pressing the hotkey directly on the front bezel, the MultiView function can also be selected in OSD menu.

[PiP / PbP], then press button.

PiP / PbP

Mode], then press button.

PiP] or

[PbP].

Now you can move backward to set the [PiP / PbP Input], [PiP Size], [PiP Position]., or [Swap].

2. Press

MultiView in OSD menu

PiP / PbP Mode :There are two modes for MultiView: [PiP] and [PbP].

[PiP]: Picture in Picture

Open up a sub-window of		B
another signal source.
	A(main)

When the sub source is not		B
detected:
	A(main)

[PbP]: Picture by Picture

Open up a sub-window side-
by-side of another signal	B A(main)
source.

1.Pressbutton on the front bezel to enter OSD Menu Screen.

	PiP/PbP Mode	Off
Input		PiP
	PiP/PbP Input
	PiP Size	PbP
Picture	PiP Position
	Swap
PiP/PbP

When the sub source is not detected:

Note

A(main)

Audio

Color

The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PbP mode.

10