8.Troubleshooting & FAQs
Q3. After installing SmartControl Premium,
when clicking on SmartControl Premium tab, nothing shows up after a while or a failure message shows, what happened?
Ans.: It might be your graphic adaptor is not compatible with the SmartControl Premium. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl Premium, and
If it is still not working, we are sorry that the graphic adaptor is not supported. Please visit Philips website and check
if an updated SmartControl Premium driver is available.
Q4. When I click on Product Information, only partial information is shown, what happened?
Ans.: It might be your graphic card adaptor driver is not the most updated version which fully supporting DDC/ CI interface. Please try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl Premium and
Attention
Theft Deterence is Enabled
Q5. I forgot my PIN for Theft Deterrence Function. How can I do?
Ans.: Philips Service center has a right to
authorization, in order to establish ownership of the monitor.
8.3 | General FAQs |
Q1: | When I install my monitor what should |
| I do if the screen shows 'Cannot |
| display this video mode'? |
Ans.: | Recommended resolution for this |
| monitor: 1920 x 1080 @ 60 Hz. |
Unplug all cables, then connect your PC to the monitor that you used previously.
In the Windows Start Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 1920 x 1080 pixels.
Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK.
Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920 x 1080 @ 60 Hz.
Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
Turn on your monitor and then turn on your PC.
Q2: What is the recommended refresh rate for LCD monitor?
Ans.: Recommended refresh rate in LCD monitors is 60 Hz, In case of any disturbance on screen, you can set it up to 75 Hz to see if that removes the disturbance.
Ans.:
monitor. Follow the instructions in your user manual to install the drivers.Your computer may ask you for monitor
Follow the instructions to insert the companion
45