Philips 241P4QRY ErgoSensor, ‡9LHZLQJGLVWDQFH, ‡9LHZLQJDQJOH, ‡9LHZLQJWLPH, ‡3RZHUVDYLQJ

5. Ergosensor

5. ErgoSensor

(Available for 241P4QRY)

Philips ErgoSensor is an innovative technology that advises users on how to sit in an ergonomically correct position at their computer. It uses a built-in sensor in the monitor to sense and measure the user’s behavior in terms of presence, posture and usage and then gives feedback for corrective actions.

Hot key

Setting

You can turn the Philips ErgoSensor On or Off, and turn demo mode On with a simple button on the bezel.

Demo mode

ErgoSensor monitor has a built in demo mode to demonstrate how

WKHGHWHFWLRQDQGQRWLÀFDWLRQPHVVDJHV\VWHPZRUNV$FWLYDWLRQ method: (A) 15 degrees neck-tilt for

angle detection. (B) 3mins for time break activation. (C) >90cm and < 70cm for distance activation.

How does it work?

‡9LHZLQJGLVWDQFH

If user is found sitting outside of optimal ergonomic zone of 70-90cm, a message is generated.

‡9LHZLQJDQJOH

If user’s posture is detected with a neck angle tilted more than 15 degrees, a message is generated.

‡9LHZLQJWLPH

If the user is found to be continuously using computer for more than one hour, a time break reminder is generated.

‡3RZHUVDYLQJ

Watt

A. User detected on seat, monitor operates normally

B. If user is not detected on seat, monitor brightness dimmed after 1 minute, saving power

Off

Demo

Watt

C. Monitor turns off after 3 minutes, and then enters standby

mode, saving powerD. User returns to the seat, ErgoSensor returns monitor to normal operation immediately.

25