Philips 2.73E+05 user manual Troubleshooting, Common Problems

Page 47

7.Troubleshooting & FAQs

7. Troubleshooting & FAQs

7.1 Troubleshooting

This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.

Common Problems

No Picture (Power LED not lit)

•Make sure the power cord is plugged into the power outlet and into the back of the monitor.

•First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position.

No Picture (Power LED is White)

•Make sure the computer is turned on.

•Make sure the signal cable is properly connected to your computer.

•make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable.

•The Energy Saving feature may be activated

Screen says

•Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Start Guide).

•Check to see if the monitor cable has bent pins.

•Make sure the computer is turned on.

AUTO button doesn't function

•The auto function is applicable only in VGA- Analog mode. If the result is not satisfactory, you can do manual adjustments via the OSD menu.

Note

The Auto Function is not applicable in DVI-Digital mode as it is not necessary.

Visible signs of smoke or sparks

•Do not perform any troubleshooting steps

•Disconnect the monitor from mains power source immediately for safety

•Contact with Philips customer service representative immediately.

Imaging Problems

Image is not centered

•Adjust the image position using the “Auto” function in OSD Main Controls.

•Adjust the image position using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.

Image vibrates on the screen

•Check that the signal cable is properly securely connected to the graphics board or PC.

Vertical flicker appears

•Adjust the image using the “Auto” function in OSD Main Controls.

•Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.

45

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Troubleshooting & FAQs Table of Contents Operation Safety precautions and maintenanceTemperature 0-40C 32-95F Humidity 20-80% RH Notational Descriptions Weee Installation 273E3 Package contents Setting up the monitorInternet and Game Connecting to your PCBasic and simple instruction on the control keys What is On-Screen Display OSD?Description of the On Screen Display Resolution notification 100mm How does it work? Smartimage Lite What is it?Why do I need it? Why do I need it? Philips SmartControl Lite First launch -Wizard First time after installationStart with Standard pane Adjust menu Color menu Color Menu allow you to adjust RGB Product information Product information Product information Exit Close SmartControl Lite Task Tray Menu EnabledTask Tray Menu Disabled Bright Dot Defects Philips Flat Panel Monitors Pixel Defect PolicyPixels and Sub pixels Types of Pixel DefectsAdjacent dark subpixels Black Dot DefectsTotal bright dot defects of all types Dark subpixelYES LCD panel typeTFT-LCD Power On mode 43.5W typical Energy Consumption Environmental 0C to 40 CMtbf 50,000hrsAutomatic power saving feature Power Management Definition Automatic PowerSavingLead-free Product ISO Very low energy consumption both in on- and standby modeProduct also comply with the following standards Epeat Electronic ProductEN550241998+A12001+A22003 EN61000-3-22006 Limits for Harmonic Current EmissionTV technician for help Federal Communications Commission FCC Notice U.S. OnlyReorient or relocate the receiving antenna EN 55022 Compliance Czech Republic Only Plassering/Ventilasjon Polish Center for Testing and Certification NoticePaikka/Ilmankierto VaroitusAchtung Beim Aufstellen Ergonomie Hinweis nur DeutschlandGeforderten Werten entspricht, ist darauf zu achten, daß Nur original-Ersatzteile verwendet werdenAsia Latin AmericaNorth America PacificWhat is excluded? Customer care and warranty Your Guarantee in Central and Eastern Europe Your warranty does not cover What is COVERED?Warranty coverage begins the day you buy your What is EXCLUDED?Please contact Philips at 800 Where can I GET More INFORMATION?Before Requesting Service To GET Warranty Service in CanadaYour International Guarantee Dear Customer Czech Republic Estonia Fujitsu Services OUBelarus IBA BulgariaSlovenia PC Hand RomaniaSerbia & Montenegro SlovakiaASC Medan Additional service pointsArgentina Macau Address RUA do PE. ANT Roliz NO.2H R/C +ASC Bandung ASC SurabayaASC Bali Customer care and warranty Where is Service AVAILABLE? WHO is COVERED? What is COVERED?To GET Warranty Service in Canada Which can be found in the relevant part of this booklet Common Problems TroubleshootingTroubleshooting & FAQs Driver from corresponding companies’ web site Q7 How should I clean the LCD surface? Color TemperatureThe six settings

2.73E+05 specifications

Philips 2.73E+05 is an innovative lighting solution designed to offer exceptional performance and efficiency. This product exemplifies Philips' commitment to enhancing the way we illuminate our spaces, both in residential and commercial settings.

The main feature of the Philips 2.73E+05 is its advanced LED technology. LEDs are known for their longevity and energy efficiency, and this model stands out by providing a significant reduction in energy consumption compared to traditional lighting options. The design promotes not only sustainability but also cost-effectiveness, making it a popular choice for eco-conscious consumers.

One of the standout characteristics of the Philips 2.73E+05 is its impressive lumen output. This feature ensures that spaces are well-lit, improving visibility and ambiance. The ability to deliver high brightness without sacrificing energy efficiency makes it suitable for a variety of applications, from offices to retail stores and even outdoor settings.

Additionally, the Philips 2.73E+05 incorporates smart lighting capabilities. This technology enables users to control their lighting remotely through smartphone apps or integrated smart home systems. Users can adjust brightness, color temperature, and even set schedules to enhance convenience and personalization in their lighting experience.

The Philips 2.73E+05 is also designed with versatility in mind. It supports various mounting options, allowing for easy installation in different environments. Whether it's recessed, surface-mounted, or pendant installation, this product adapts to meet the needs of diverse spaces.

Durability is another important aspect of the Philips 2.73E+05. Constructed with high-quality materials, this lighting solution is resistant to wear and tear, ensuring that it remains functional over time. This reliability is crucial for businesses that depend on consistent lighting for their operations.

In summary, Philips 2.73E+05 is a state-of-the-art lighting solution that combines efficiency, versatility, and smart technology. With its powerful LED capabilities, high lumen output, and robust construction, it not only enhances the aesthetic appeal of any space but also offers long-term benefits in terms of energy savings and maintenance. As the demand for sustainable and intelligent lighting grows, products like the Philips 2.73E+05 stand out as leading examples of innovation in the field.
Top Page Image Contents