Safety precautions and mainte- nance, Warnings

Page 3

1. Important

This electronic user’s guide is intended for anyone who uses the Philips monitor.Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.

The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

1.1Safety precautions and mainte- nance

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor.

Operation

Please Keep the monitor out of direct sunlight, very strong bright lights and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.

Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

When positioning the monitor, make sure the power plug and outlet are easily ac- cessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)

Do not subject the monitor to severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your moni- tor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immedi- ately and disconnect the power cord.Then, remove the foreign substance or water, and send it to the maintenance center.

Do not store or use the monitor in loca- tions exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer life- time, please use the monitor in a location that falls within the following temperature and humidity ranges.

Contents Customer care and warranty Troubleshooting & FAQs247E4 Table of Contents Operation 1.1 Safety precautions and mainte- nanceMaintenance WarningsNotes, Cautions and Warnings Service1.2 Notational Descriptions Humidity 20-80% RHTaking back/Recycling Information for Customers about/sustainability/ourenvironment productrecyclingservices.page1.3 Disposal of product and packing material Waste Electrical and Electronic Equipment WEEEInstall base stand 2. Setting up the monitor2.1 Installation Package contents1. Connect the power cord to the back of the monitor firmly Connecting to your PC Model 247E4QSD, 247E4LSBAC/DC power input VGA input DVI-D input Kensington anti-theft lock AC/DC power input VGA input HDMI input HDMI or MHL inputoption2.2 Operating the monitor Switch monitor’s power ON and OFF Access the OSD menuAdjust the OSD menu Change the signal input source Return to previous OSD level Adjust the speaker volumeThe OSD Menu Description of the On Screen Display What is On-Screen Display OSD?Model 247E4QSD, 247E4LSB Basic and simple instruction on the control keysPhysical Function Tilt Resolution notification2.3 MHL Mobile High-Definition Link introduction What is it?How do I use the MHL function? How does it work? how do I connect?3.1 SmartImage Lite Why do I need it?How to enable SmartImage Lite? 3. Image OptimizationFirst launch -Wizard Installation3.2 SmartContrast 3.3 Philips SmartControl LiteStart with Standard pane Adjust menu You can follow the instruction and do the adjustmentCancel prompts user if you want to cancel installation 2. Start - starts the 6-step color calibration sequence 4. To return to Color home pane, click the Cancel buttonColor menu 1. Show Me starts color calibration tutorialFirst color Calibration Screen SmartImage LitePrevious button is disabled until the second color screen Display the Source instruction pane and current input source setting The Context Menu has four entries Task Tray Menu EnabledTask Tray Menu Disabled Context Sensitive menu5. Make the call by following the instruction of the software program 4.2 Using the device4. Built-in Webcam with Microphone 4.1 PC system requirementsPicture/Display247E4LSB, 247E4LHAB, 247E4LHSB 5. Technical SpecificationsPicture/Display247E4QSD, 247E4QHAD,247E4QHKAD, 247E4QHSD ConnectivityConvenience Power247E4QSDPower247E4QHAD Power247E4QHKADPower247E4LHSB Power247E4QHSDPower247E4LSB Power247E4LHABCompliance and standards CabinetCE Mark, FCC Class B, GOAST, SEMKO,TCO Certified, UL/cUL H. freq kHz 5.1 Resolution & Preset ModesRecommended Resolution Resolution247E4QHKAD 6. Power ManagementPower Management Definition 247E4QSDEnergy Efficiency 7. Regulatory InformationLead-free Product CongratulationsBenefits of EPEAT CE Declaration of ConformityThe EPEAT Electronic Product Environmental United States Only Energy Star DeclarationFederal Communications Commission FCC Notice U.S. Only FCC Declaration of ConformityPolish Center for Testing and Certification Notice EN 55022 Compliance Czech Republic OnlyRéorienter ou déplacer l’antenne de réception Placering/Ventilation VARNING North Europe Nordic Countries InformationErgonomie Hinweis nur Deutschland 2. nur original-Ersatzteile verwendet werdenChina RoHS EU Energy LabelThe European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year Types of Pixel Defects 8. Customer care and warranty8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Pixels and Sub pixelsBRIGHT DOT DEFECTS Black Dot DefectsProximity of Pixel Defects Pixel Defect TolerancesConsumer care number 8.2 Customer Care & WarrantyContact Information for WESTERN EUROPE region Countryregion Contact Information for CENTRAL AND EASTERN EUROPE regionCall center Contact Information for LATIN AMERICAAL SHAHD COMPUTER L.L.C Contact Information for APMEA regionNo Picture Power LED not lit 9. Troubleshooting & FAQs9.1 Troubleshooting Common ProblemsImage appears distorted.Text is fuzzy or blurred 9.2 SmartControl Lite FAQsThe power on light is too strong and is Image appears blurred, indistinct or too dark9.3 General FAQs Q2 What is the recommended refresh rate for LCD monitor?Q5. I forgot my PIN for Theft Deterrence Function.What can I do? Q6 Is the LCD screen resistant to scratches? Q4 How do I adjust the resolution?Q5 What if I get lost when I am making monitor adjustments via OSD? Q7 How should I clean the LCD surface?Q3. I cannot hear sound from the monitor display Ans 9.4 MHL FAQsSpecifications are subject to change without notice 2012 Koninklijke Philips Electronics N.V. All rights reservedVersion M4247E1T