INSTALLATION INSTRUCTIONS
Swivel Base
To attach the swivel base to the monitor, do the following:
•Carefully turn the monitor on its side or upside down. ( see figure 1 )
•Locate the cavities at the bottom front of the monitor.
•Insert the pegs on the swivel base into these cavities. Push the swivel base forward until the swivel base locks in place.
•To remove the swivel base, hold the bottom of the swivel base, then push it out.
InstallRemove
ENGLISH
Figure 1 Installing and Removing the Swivel Base
Power Cord
Power Source:
1.Make sure the power cord is the correct type that required in your area.
2.This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area. ( No user adjustment is required. )
3.Connect the power cord into your monitor’s power input socket, and then plug the other end into a
3