Technical Specifications | Philips 221S3UCB specification

Page 17

4.Technical Specifications

4. Technical Specifications

Picture/Display

	Monitor Panel Type	TFT-LCD
	Backlight	LED
	Panel Size	21.5" (54.6cm)
	Aspect Ratio	16:9
	Pixel Pitch	0.2842 x 0.2842 mm
	Brightness	150 cd/m²
	Contrast Ratio (typ.)	1000:1
	Response Time (typ.)	5ms
	Optimum Resolution	1920 x 1080 @ 60Hz
	Viewing Angle	160° (H) / 150° (V) @ C/R > 10
	Display Colors	16.7M
	Connectivity
	Video Signal Input	USB 2.0
	Convenience
	Other Convenience	Kensington Lock
	Stand
	Tilt	-5 / +20

	Swivel	-65 / +65

	Height adjustment:	70mm


	Power
	Power Input	USB 2.0
	On Mode	9 W (typ.) (USB 2.0)
	Standby Mode	0.3 W (typ.)
	Off	0 W
		Model
		DSA-20PFE-05 FEU 050300
		DSA-20PFE-05 FCH 050300
	Optional Power Adaptor	DSA-20PFE-05 FUS 050300
		Specification
		Input : 100-240VAC,50/60Hz,0.7A
		Output : 5 VDC, 3A

	Dimension
	Product with stand (WxHxD)	507 x 400 x 220 mm
	Product without stand	507 x 323 x 59 mm
	(WxHxD)	507 x 323 x 59 mm
	(WxHxD)
	Weight
	Product with stand	4.55kg
	Product without stand	2.91kg
	Product with packaging	6.12kg

Contents 221S3U Troubleshooting & FAQsCustomer care and warranty Table of Contents Warnings 1.1 Safety precautions and mainte- nanceService 1.2 Notational DescriptionsThe casing cover should be opened only by qualified service personnel Temperature 0-40C 32-95F Humidity 20-80% RHRecycling Information for Customers 1.3 Disposal of product and packing materialWaste Electrical and Electronic Equipment WEEE Start 2. Setting up the monitor2.1 Installation Connecting to your laptop Insert the height adjustment pin lock before lifting the monitor Remove the height adjustment pin lock before adjusting the height70mm Resolution notification1. Extend the monitor base to its maximum height 2.2 Remove Base Stand and BaseRemove the Base Stand 1. Remove the 8 screw covers Remove the base Condition For VESA standard mounting applications2. Remove the 4 screws and then remove the base from the monitor 100mm 100mm3. USB monitor operation 3.2 DisplayLink Graphics Software Installation3.1 Introduction 3. USB monitor operation3.3 How to control the display Use the drop down list to select a display to be configured DisplayLink Manager Sub-menu Option Menu Option 4.Technical Specifications 4. Technical SpecificationsThe USB monitor works with USB 2.0 480 Mbps 4.1 Resolution & Preset Modes5. Regulatory Information FCC Declaration of Conformity EN 55022 Compliance Czech Republic Only Polish Center for Testing and Certification NoticeNorth Europe Nordic Countries Information Placering/Ventilation VARNINGErgonomie Hinweis nur Deutschland 环保使用期限 China RoHS6. Customer care and warranty 6. Customer care and warranty6.1 Philips’ Flat Panel Monitors Pixel Defect Policy ACCEPTABLE LEVEL BRIGHT DOT DEFECTSBLACK DOT DEFECTS TOTAL DOT DEFECTSCountry 6.2 Customer Care & WarrantyConsumer care number PriceCall center PT. Gadingsari elektronika Prima Contact Information for APMEA region7.1 Troubleshooting 7. Troubleshooting & FAQsCommon Problems Imaging Problemssolvents such as ethyl alcohol, ethanol General FAQssystem systems other than Windows USB monitor FAQsVersion M3221SUE1T Specifications are subject to change without notice2012 Koninklijke Philips Electronics N.V. All rights reserved