Menu operation guide
#Press the MENU button.
The MAIN MENU screen will be displayed.
M E N U
K E Y S T O N E
P I C T U R E
P O S I T I O N
S H U T T E R
V O L U M E
L A N G U A G E
O P T I O N
SD MENU
SELECT 
ENTER 
EXIT
$Press the F or G arrow buttons to select an item. Selected items will be displayed in blue.
MENU
KEYSTONE
PICTURE
POSITION
SHUTTER
VOLUME
LANGUAGE
&Press the F or G buttons to select an item, and then press the I or H buttons to change or adjust the setting.
An individual adjustment screen such as the one shown below will be displayed for
BRIGHT0
The bar scale will turn green when any adjustment changes the setting from the factory set value.
For items without any selective arrow or
Unavailable on-screen menu items
This projector has unadjustable items and unusable functions depending on the signal being input. When an item cannot be adjusted or a function cannot be used, the corresponding
Returning a setting to the factory default
If you press the NORMAL button on the remote control unit, you can return settings to the factory default settings. However, the operation of this function varies depending on which screen is being displayed.
BWhen a menu screen is being displayed
PICTURE
PICTURE MODE 
NORMAL
CONTRAST | 0 | |||
BRIGHT |
|
|
| 0 |
|
|
|
|
|
COLOR |
|
|
| 0 |
|
|
|
|
|
TINT |
|
|
| 0 |
|
| |||
SHARPNESS | 0 | |||
|
|
|
|
|
COLOR | TEMP . | 0 | ||
GAMMA | ADJUST |
| ||
MEMORY |
| SAVE |
| |
MEMORY |
| LOAD |
| |
TV - SYSTEM | AUTO1 | |||
|
| |||
S E L E C T |
| ADJ | ESC | |
All items displayed will be returned to their factory default settings, and the bar scale will appear white.
BWhen an individual adjustment screen is being displayed
BRIGHT0
Only the item displayed will be returned to the factory default setting, and the bar scale will appear white.
NOTE:
BTriangle symbols above and below a menu bar indicate the factory default setting. Items which do not have these triangle symbols cannot be returned to the factory default setting.
Indicates the standard factory default setting
Indicates the current adjustment value
BThe positions of triangle symbols vary depending on the type of signal being input.
Basic Operation
OPTION
SD MENU
SELECT 
ENTER 
EXIT
%Press the ENTER button to accept the selection.
The selected menu screen or adjustment screen will then be displayed.
(Example: PICTURE menu)
|
| PICTURE |
| |
PICTURE | MODE | NORMAL | ||
|
| |||
CONTRAST | 0 | |||
|
|
|
|
|
BRIGHT |
|
|
| 0 |
|
|
|
|
|
COLOR |
|
|
| 0 |
|
|
|
|
|
TINT |
|
|
| 0 |
|
| |||
SHARPNESS | 0 | |||
|
|
|
|
|
COLOR | TEMP . | 0 | ||
GAMMA | ADJUST |
| ||
MEMORY |
| SAVE |
| |
MEMORY |
| LOAD |
| |
|
|
| ||
TV - SYSTEM | AUTO1 | |||
S E L E C T |
| ADJ | ESC | |
display does not appear, and the item or function will not work even if the ENTER button is pressed.
Returning to the previous screen
If you press the MENU button while a menu screen is being displayed, the display will return to the previous screen.
If you press the MENU button while the MAIN MENU screen is being displayed, the MAIN MENU screen will be cleared.
Using the freeze function
The picture will alternate between a still picture and a moving picture each time the FREEZE button on the remote control unit is pressed.
Still picture |
|
|
| Moving picture |
|
|
| ||
|
|
|
|
|