Contents, Precautions with regard to safety

Contents
Preparation
IMPORTANT SAFETY NOTICE	2
Precautions with regard to safety ....	5
Accessories	9
Precautions on handling	10
Location and function of each part...	12
Using the remote control unit	17
Inserting the batteries	17
Operating range	17
Connections	18
Notes on connections	18
Example of connecting to video equipment ...	18
Example of connecting to equipment
compatible with YPBPR(CBCR) signals ...	19
Example of connecting to computer ...	20
Setting-up	21
Projection methods	21
Projector position	21
Basic Operation
Starting to use	22
Turning on the power	22
Turning off the power	23
On-screen menus	24
Menu screens	24
Menu operation guide	26
Unavailable on-screen menu items...	26
Returning to the previous screen....	26
Returning a setting to the factory default ...	27
Using the freeze function	27
Correcting keystone distortion	28
Setting the ASPECT	30
Selecting the picture mode	32
Using the shutter function	33
Changing the display language	33
Muting the sound	33
Adjusting the picture	34
PICTURE MODE	34
CONTRAST	34
BRIGHT	34
COLOR	34
TINT	35
SHARPNESS	35
TV SYSTEM	35
Color Hue Setting	35
WHITE BALANCE R/G/B	36
SIGNAL MODE	36
GAMMA ADJUST	36
MEMORY SAVE	36
MEMORY LOAD	36
Projecting sRGB compatible pictures ...	37

Adjusting the position	38
HORIZONTAL POSITION	38
VERTICAL POSITION	38
DOT CLOCK	38
CLOCK PHASE	38
ASPECT	39
AUTO SETUP	39
Advanced Operation
Option settings	39
OSD	39
NR (Noise Reduction)	39
PC PRIORITY	39
BACK COLOR	39
4:3 H-POS	40
FRONT/REAR	40
DESK/CEILING	40
FAN CONTROL	40
LAMP POWER	40
LAMP RUNTIME	40
SD memory card	41
What is the SD memory card?	41
Data that can be played back	41
Note when using SD memory cards...	41
Inserting and removing the SD
memory card	42
About the SD menu	43
Playing back still images	44
Slide playback of still images	45
Playing back moving images	49
Error displays	50
Others
Indicators	51
Cleaning and replacing
the air filter	53
Replacing the lamp unit	54
Before calling for service	57
Specifications	59
Appendix	61
List of compatible signals	61
Connector pin wiring	62
DCF standard	64
Projection dimensions calculation methods...	65
Dimensions	65
Trademark acknowledgements	66

Precautions with regard to safety

WARNING

If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet.

BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result.

BCheck that no more smoke is coming out, and then contact an Authorized Service Center for repairs.

BDo not attempt to repair the projector yourself, as this can be dangerous.

Do not look into the lens while the projector is being used.

BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

Be especially careful not to let young children look into the lens.

In addition, turn off the power when you are away from the projector.

Do not install this projector in a place which is not strong enough to take the full weight of the projector.

BIf the installation location is not strong enough, it may fall down or tip over, and severe injury or damage could result.

Installation work (such as ceiling suspension) should only be carried out by a qualified technician.

BIf installation is not carried out correctly, there is the danger that injury or electric shocks may occur.

If foreign objects or water get inside the projector, or if the projector is dropped or the cabinet is broken, turn off the power and disconnect the power cord from the wall outlet.

BContinued use of the projector in this condition may result in fire or electric shocks.

BContact an Authorized Service Center for repairs.

Do not overload the wall outlet.

BIf the power supply is overloaded (for example, by using too many adapters), overheating may occur and fire may result.

Do not remove the cover or modify it in any way.

BHigh voltages which can cause fire or electric shocks are present inside the projector.

BFor any inspection, adjustment and repair work, please contact an Authorized Service Center.

Clean the power cord plug regularly to prevent it from becoming covered in dust.

BIf dust builds up on the power cord plug, the resulting humidity can damage the insulation, which could result in fire. Pull the power cord out from the wall outlet and wipe it with a dry cloth.

Preparation

4-ENGLISH

ENGLISH-5