4:3 H-POS
(4:3 aspect mode only)
4:3 H - POS | CENTER |
| [ |
| RIGHT |
| [ |
| LEFT |
This sets the horizontal positioning of the projected image when the 4:3 aspect ratio is selected. (Refer to page 31.)
FRONT/REAR
FRONT/REAR FRONT
[
REAR
This setting should be changed in accordance with the projector
Set to “FRONT” when using a normal reflective screen with the projector positioned in front of the screen, and set to “REAR” when using a translucent screen with the projector positioned behind the screen.
DESK/CEILING
DESK/CEILING DESK
[
CEILING
This setting should be changed in accordance with the projector
Set to “DESK” when setting up the projector on a desk or similar, and set to “CEILING” when suspending the projector from the ceiling using the ceiling bracket which is sold separately.
FAN CONTROL
FAN CONTROL NORMAL
[
HIGH
If using of this projector at high
elevations (above 1 400 m), set FAN CONTROL to “HIGH”.
LAMP POWER
LAMP POWER | HIGH |
| [ |
| LOW |
This setting changes the lamp brightness. When set to “LOW”, the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced.
The LOW position is recommended for narrow rooms where a high picture luminance is not essential or for watching movies.
LAMP RUNTIME
This setting displays the usage time for the lamp unit which is currently being used.
NOTE:
BThe lamp’s operating life varies depending on the usage conditions (such as the LAMP POWER setting and the number of times the power is turned on and off).
SD memory card
What is the SD memory card (option)?
The SD memory card is a semiconductor memory which at 24 mm x 32 mm x 2.1 mm is about the size of a postage stamp. It is a
Record: Still image data | Play back: Still image data |
Moving image data | |
Digital | Moving image data |
| |
camera |
|
Computer |
|
| 16MB |
Data that can be played back | Operation | |
| ||
Still image data |
| |
BDCF compliant still image data (See page 64 for details on DCF | Advanced | |
compliance.) | ||
|
Moving image data
BMPEG4 movie data (audio: G.726 compliant)
However, only files in ASF format can be played back.
Note when using SD memory cards
Do not turn off the projector’s power or remove an SD memory card from the projector while the SD memory card is in use (while the access indicator is flashing). (See page 42.) If this is not observed, corruption of the data on the SD memory card may occur.