Inserting and removing the SD memory card
About the SD menu
Inserting the SD memory card
Insert the SD memory card so that it is facing the correct way.
#Open the slot cover at the side of the projector.
$Insert the SD memory card as shown in the illustration below. Insert the SD memory card with the label side facing upward and so that the
NOTE:
BIf you try to force the SD memory card to go in the wrong way, it may damage the SD memory card and the card slot.
%Close the slot cover.
Removing the SD memory card
#Open the slot cover.
$Check that the access indicator at the
Access lamp
NOTE:
BAlways be sure to check that the access indicator is not flashing before removing the SD memory card. If the SD memory card is removed while the access indicator is flashing, the data stored on the SD memory card may become corrupted.
%Push in the middle of the SD memory card. (The SD memory card will protrude slightly.)
&Remove the card.
The still image data and moving image data that is stored on SD memory cards can be played back using the SD menu.
Displaying the SD menu
Press the SD button to change the display to the SD CARD screen.
| PICTURE (page 44) |
| This lets you play back still image |
| data. |
PICTURE |
|
| SLIDE SHOW (page 45) |
SLIDE SHOW | This lets you play back still image |
| data in a certain order. |
VIDEO |
|
| VIDEO (page 49) |
| This lets you play back moving |
| image data. |
BIf the SD menu is not displayed when the SD button is pressed, | Operation | |
| ||
| ||
displayed or played back. |
| |
NOTE: | Advanced | |
BWhen the SD CARD screen is selected, the SD MENU button can be used | ||
|
to return to a previous screen (up to the SD menu shown above).
'Close the slot cover.