Functional Overview, See illustrations on, Controls

5. FUNCTIONAL OVERVIEW

See illustrations on page 4

CONTROLS

On projector (fig. 1)

1Power ON z

For switching the projector in power on. Standby/OFF y

For switching the projector in standby mode.

2Lens

For selecting the optical lens adjustments Zoom, Focus, Digital Keystone correction and Digital Image Shift (see Note). The button toggles between the ZOOM-, FOCUS-, KEYSTONE and DIGITAL SHIFT function.

Note:

Digital Image Shift feature can only be addressed while being in the WIDE and NORMAL (WIDE) picture display modes during video or DTV input.

(See page 24 for details.)

3Data-1 button

For selecting the Data 1 signal as the current projection source.

4Data-2 button

For selecting the Data2 signal as the current projection source.

5Video button

For selecting the video signal or S-video signal as the current projection source.

6Auto sync

For activating the Auto sync operation in Data mode.

7OK

For action confirmation in the menu when the menu is on the screen (activated)

8Cursor Control

When the menu is active the Cursor Control buttons control the menu cursor. The cursor control, by means of the local keyboard, works with up/down and left/right button operation.

9D-Zoom

For addressing the D-Zoom function. The button toggles between the digital magnification factors, x1, x2, x3, x4, x6 and x8.

0D-Freeze button

Digital Freeze function: to instantly freeze a moving image.

!V-Effect button

Digital Video Effect correction: to enhance image quality.

@V-Format button

Allows to modify or customise the picture display mode.

#Menu

For activating and de-activating the On Screen Display Menu

$Volume buttons (+/-)

To adjust audio volume level.

%Temperature warning indicator (Temp.)

Flashes when the temperature of the projector is too high

^Lamp replacement indicator (Lamp) Lights to indicate the status of the lamp; Green: lamp is ready

Flashing green: warming up

Red: change the lamp

&Audio / Video - Mute

For muting the sound of the projector (or an externally connected sound amplifier) and for muting the picture.

*Power indicator y I

Lights up red when the projector enters standby mode. Lights up green when the projector is turned on.

(Cooling fan

Intake of air for ventilation.

)Kensington Security Standard connector

Slit for inserting an optional locking device (Kensington lock).

¡Carrying handle

™Foot releases/height adjustment

For adjusting the height and vertical angle of the projector.

£Remote control sensors

Receive the signals from the remote control.

≤Speakers

∞Cooling fan

Exhaust of air for ventilation.

§Air filter/Cooling fan