Philips CF-30FTSAZAM Removing the FPC HDD BAT, Removing the PAD PCB, Removing the Main PCB

7.1.9.Removing the FPC HDD BAT

		to Connector (CN8)
		to Connector (CN7)
		<N16>
FPC HDD BAT
<N29>			to Connector (CN9)
<N29>	<N29>		to Connector (CN800)
<N29>			Antenna Cable Sheet
HDD Cable Cover		Tape	to Connector (CN26)
			Connector(CN10)
Pad Protect
			Connector(CN26)
Sheet
Connector
(CN8)
			Tape
Connector
(CN7)			Connector(CN9)
Pad PCB			Connector (CN800)

1.Remove the 4 Screws. <N29>

2.Remove the HDD Cable Cover.

3.Remove the Antenna Cable Sheet.

4.Remove the 2 Tapes.

5.Disconnect the 2 Cables from the 2 Connectors. (CN10,CN26)

6.Remove the Tape.

7.Disconnect the Cable from the Connector. (CN9)

8.Remove the Pad Protect Sheet.

9.Disconnect the Cable from the Connector. (CN800)

10.Disconnect the 2 Cables from the 2 Connectors. (CN7,CN8)

11.Remove the Screw. <N16>

12.Remove the FPC HDD BATT.

Screws <N16>: DRQT26+E5FKL

Screws <N29>: DRQT26+E3FNL

7.1.10. Removing the PAD PCB

TP PCB Screw Sheet

Tape <N29>

<N29>

Connector (CN801)

Pad PCB

Connector (CN802)

1.Remove the Tape and disconnect the Cable from the Con- nector. (CN801)

2.Disconnect the Cable from the Connector. (CN802)

3.Remove the TP PCB Screw Sheet.

4.Remove the 2 Screws. <N29>

5.Remove the PAD PCB.

Screws <N29>: DRQT26+E3FNL

7.1.11.Removing the Main PCB

TOP Screw Sheet

<N7>

Connector (CN17)

Connector (CN27)

1.Remove the TOP Screw Sheet.

2.Remove the Screw. <N7>

3.Disconnect the 2 Cables from the 2 Connectors. (CN17,CN27)

7-5