Philips CF-30FTSAZAM service manual Preparation of SW LED FPC, Attach the Tape

7.2.7.Setting the Palm Top Cover Sheet, Palm Top Cover, Touch Pad Adhesion Seat, Touch Pad SW Knob, LED PCB And SW LED PCB

1.Set the SW LED PCB.

2.Attach the Power LED Packing Sheet to the LED Spacer Sheet.

3.Attach the LEDX6 Spacer Sheet on the SW LED PCB.

4.Fix the SW LED PCB using the Screw. <K2-42>

5.Attach the PW LED Sheet.

6.Pass the Cable of LED PCB through the hole 1 on the Top Cabinet, then set the LED PCB.

7.Attach the LES Spacer Sheet on the LED PCB.

8.Set the touch Pad SW Knob In and Touch Pad SW Knob

9.Attach the TP Bottom Tape to the Touch Pad.

10.Pass the Cables of the Touch Pad through the hole 2 on the Top Cabinet, set the touch Pad.

11.Attach the Touch Pad Adhesion Seat.

12.Fix the Palm Top Cover using the 5 Screws. <N29> No1 to No5

13.Attach the Palm Top Cover Sheet.

Note:

Tighten the Screws in the numbered order (No1 to No5).

Screws <K2-42>: DRQT26+D4NLT

Screws <N29>: DRQT26+E3FNL

	Palm Top Cover Sheet
No.2
<N29>
No.4	No.5
	<N29>No.1
<N29>
	<N29> No.3
	<N29>
	Palm Top Cover
	Touch Pad Adhesion Seat
	PW LED Sheet
	Touch Pad
	<K2-42>
	PW LED
	PCB
LED PCB	Touch Pad SW Knob	SW LED

PCB

Touch Pad

SW Knob In

Hole 1

Hole 2

■Preparation of SW LED FPC

* Notes:

1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2

0.5			Attach the Tape
0.5
				Use a pinset.			Attach it not to overlap the SW leg.
	1	1
					White Full Line : Mountain Fold
						White Dotted Line : Valley Fold

Flex Notch Standard 0 1

Attach the Sheet

SW-LED FPC Ass'y

7-17