Black Box KV4116E, KV2116A Enable Debug Messages, Set/Change Password, To activate security, Exit

Page 46

SERVSELECT IP VM INSTALLER/USER GUIDE

Enable Debug Messages

This menu option turns on console status messages. Because this can significantly reduce performance, you should only enable debug messages when instructed to do so by technical support. When you are finished viewing the messages, press any key to exit this mode.

Set/Change Password

The ServSelect IP VM switch can be set to a secure mode where the Terminal Applications menu cannot be accessed without first entering a password.

To activate security:

1.Select the Set/Change Password menu option. You will be prompted to decide if you wish to continue. Enter a Y.

2.Type a password for this switch and press Enter. This password may be up to 14 characters long.

3.You will be prompted to re-type the password. Once you complete this step, security will be active and you will not be able to access ServSelect IP VM switch terminal operations without the password.

To change the password:

1.Select the Set/Change Password menu option.

2.You will be prompted to type the old password and a new one.

3.Re-enter the new password to verify.

CAUTION:

This password places your or ServSelect IP VM switch terminal in a secure mode. This password should be guarded like any network password and care should be taken to avoid forgetting or misplacing it. In the event that you forgot the password, type Help. You will be given a one time use key to supply to technical support, who will then supply you with a one time use password that you can use to access the Serial Port..

Restore Factory Defaults

This menu option will restore all appliance options to the default settings.

Reset Appliance

You can use this menu option to initiate a soft reset of the appliance.

Exit

This menu selection will return you to the ready prompt.

44

Page 45 Page 47
Image 46
Page 45 Page 47
Contents KV2116A KV2116E KV4116A KV4116E MAYPage Welcome to the ServSelect Family KV2116A KV2116E KV4116A KV4116EServselect IP VM INSTALLER/USER Guide Compliance Statements Japanese Compliance Statement Other Agency ApprovalsBasic operations Product Specification Product overviewInstallation Computer terminal operationsLocal Port Product SpecificationSerial Port ServSelect IP VM appliance product specifications User ConsolesGlossary Features and benefitsProduct overview Intelligent cablesVirtual Media OSD graphical user interfaceVideo Accessing the appliance through network connectionAccessing target devices Flash upgradabilityExample ServSelect IP VM appliance configuration Device Local user Digital userInstallation overview InstallationSetting up the network Cord Digital User ServSelect IP VM Required itemsPeripherals SAM module Servers Connecting the appliance hardware Safety PrecautionsRack mount safety considerations Verifying Ethernet connections Connecting a SAM to each target deviceConnecting local peripheral devices To connect local virtual media, complete the following stepTiering multiple appliances Local user a ServSelect IP VM appliance To tier multiple appliances, complete the following stepsServSelect III VM appliance tiered ACI port Adjusting mouse settings Configuring ServSelect IP VM SoftwareAdding earlier-model appliances Appliance configuration with an earlier-model appliance Local user ServSelect IP VM Tiered applianceSetting up the appliance Basic operations Controlling the switching system from the analog PortStarting the OSD interface OSD interface status symbols Connecting a user to a target deviceSymbol Description OSD interface navigation basics Using the OSD interfaceClick Setup Menu Key, key combination, or Result Mouse actionConnecting local virtual media Configuring the appliance and the OSD interface Option PurposeTo access the Names window, complete the following steps Assigning target device namesNames window Assigning device types To access the Devices window, complete the following stepsTo assign a device type, complete the following steps To access the Menu window, complete the following steps Changing the display behaviorControlling the status flag Selecting display languageTo select a language for the OSD interface OSD interface status flags FlagDescriptionSetting the keyboard country code 10. Set Position windowTo disable the screen saver, complete the following steps Setting appliance securityTo enable the screen saver, complete the following steps To set or change a password, complete the following stepsSetting the preemption warning 12. Preempt windowTo access the Commands window, complete the following steps Managing target device tasks using the OSD interfaceCommands to manage routine tasks for the target device Feature PurposeUpgrading the firmware Displaying version informationTo view version information, complete the following steps Viewing and disconnecting user connections Viewing the display configurationTo upgrade firmware, complete the following steps Resetting the keyboard and mouse To disconnect a user, complete the following stepsScanning the switching system 18. Scan windowTo cancel scan mode, complete one of the following steps Running switching system diagnosticsTo start the Scan mode, complete the following steps Diagnostic test details To run diagnostic tests, complete the following stepsBroadcasting to target devices 21. Broadcast windowServselect IP VM INSTALLER/USER Guide Console menu Network configurationComputer terminal operations Other Console Main menu optionsTo change the password Enable Debug MessagesSet/Change Password Restore Factory DefaultsAppendix a Flash upgrades Repairing damaged firmwareTo repair damaged firmware, complete the following steps Appendix B Virtual media Booting a computer using virtual memoryVirtual media and USB 2.0 constraints Virtual media restrictions Table C.1 UTP wiring standards Pin Wiring standardsCabling installation, maintenance, and safety tips Appendix C UTP cablingServselect IP VM INSTALLER/USER Guide Before you call Appendix D Getting help and technical AssistanceGetting help and information from the World Wide Web Page Page Page Page Page Page Customer Support Information Doc. No -620-501A

KV4116A, KV2116E, KV2116A, KV4116E specifications

The Black Box KV4116E, KV2116A, KV2116E, and KV4116A are advanced KVM (keyboard, video, mouse) switches designed to streamline the management of multiple computers from a single workstation. These devices are essential for IT professionals, data center operators, and anyone who needs to control several systems efficiently.

One of the standout features of the KV4116E and its counterparts is their ability to support a variety of computer platforms, including PC and Mac. They are equipped with enhanced video performance, allowing for resolutions up to 1920 x 1200 at 60Hz. This ensures that users can enjoy high-definition visuals without compromising clarity or quality.

The KV series also boasts extensive input and output options, accommodating multiple user requirements. With support for USB and PS/2 connections, these KVM switches can interface seamlessly with a wide range of peripherals, including keyboards, mice, and other input devices. The KV2116A, KV2116E, and KV4116A, in particular, allow users to connect and control up to 16 computers, making them ideal for larger setups or environments where multiple systems need to be monitored and managed simultaneously.

Security features are also prioritized in the KV series, with options for management access control. These KVM switches often include secure password protection and user authentication, ensuring that sensitive data and systems are safeguarded against unauthorized access.

Ease of use is another key characteristic, highlighted by features such as hotkey switching and a user-friendly on-screen display. This allows for quick transitions between systems, which can significantly increase efficiency during critical operations. The KV series also supports audio switching, enabling users to manage their audio output in tandem with their video and input devices.

In summary, the Black Box KV4116E, KV2116A, KV2116E, and KV4116A KVM switches represent a robust solution for users needing to streamline their multi-computer operations. Their combination of advanced video support, multiple connectivity options, robust security features, and ease of use makes them suitable for a wide array of professional and personal applications. Whether in a data center, an IT support environment, or a complex home setup, these switches provide the reliability and functionality that users require.
Top Page Image Contents