Black Box Modular Switches Introduction LE14XXA-Series 4-Port Modules4PM, Product Description

Page 42

ack Box Modular Switches

Installation and User Guide (8/99)

422C

100Mb Multi- FX mode

2

(0.4)

1300 62.5/12

5

-14

-31

15

5

16

5.7

Note: The use of either multi-mode or single-mode fiber to operate at 100Mbps speed over long distances (i.e., in excess of approx. 400 meters) can be achieved only if the following factors are both applied:

∙The 100Mb fiber segment must operate in full-duplex (FDX) mode, i.e. the full-duplex (factory default) setting for 100Mbps fiber ports must be used, and

∙The worst-case OPB of the fiber link must be greater than the fiber cable’s passive Attenuation.

(Attenuation = Cable loss + LED aging loss + Insertion loss + safety factor)

0Introduction - LE14XXA-Series 4-Port Modules(4PM)

This chapter describes each 4-Port Module (4PM), including appearance, functionality, and status displays.

1Inspecting the Package and Product

This section applies only to 4PMs shipped as separate items, i.e., 4PMs not factory installed in a LE14XXA-Series 4PM slot.

Examine the shipping container for obvious damage prior to installing a 4PM; notify

the carrier of any damage which you believe occurred during shipment or delivery.

Inspect the contents of this package for any signs of damage and ensure that the items

listed below are included.

This package should contain:

One or more 4PMs.

Installation instructions, with illustrations

Remove the 4PM(s) from the shipping container. Be sure to keep the shipping container

should you need to ship any of the 4PMs separately at a later date.

In the event there are items missing or damaged contact your supplier. If you need to

return the unit, use the original shipping container if possible. Refer to Chapter 5 for

specific return procedures.

2 Product Description

36

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Modular Switches Trademarks Contacting Black Box CorporationFCC Statement Black Box Modular Switches Installation and User Guide 8/99 Table of Contents Troubleshooting Fiber Multi -mode connector types Technical Specifications PerformanceConnectors for copper wiring Network StandardsPower Supply Internal Fiber Single-mode connector typesManual switch -selections and jumpers 48VDC Power Supply OptionalWarranty Agency ApprovalsLE1408A Model InformationLE1401A LE1416AIntroduction Inspecting the Package and Product Product Description , 8-port and 16-port Modular Switches LE14XXA-Series chassis modelsModular Switches 4-port modules, 100Mb fiber Fiber 4-Port Modules, LE1420C, LE1419C LE1423C LE1422C4-port modules, 10 Mb fiber 4 4-Port Module, RJ-45 copper Combo 4 Port Modules, 3 + 1, 3 RJ-45 and 1 fiber portFrame Buffering and Latency Page Full-duplex or Half-duplex operation, auto-sensing Plug-and-Play installation for high performance switchingFront-mounted LEDs, world-wide AC power supply Port, 12-port, 8-port and 4-port modelsApplications Example 1 LE1401AXample 2 8-port LE1408A 4c LE1416A provides a 100Mb mixed-media backbone Switch Example 3 16-port LE1416AInstallation Locating LE14XXA-Series SwitchesIeee Standard Media Type Max. Distance Port Module Fiber Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock CopperConnecting Fiber Optic S C-type, Snap-In Connecting Single-Mode Fiber OpticMedia Ieee Standard Connector Proper mounting Table-Top or Shelf MountingWall or Vertical Surface Mounting, 8-port LE1401A Magnum LE1401A, optionalFactory Settings 10/100 Mbps Factory Settings For RJ-45 Factory Settings 10Mbps Half- Duplex 10Mbps Fiber ports internal jumper settings Powering the LE14XXA-Series SwitchPage Ep 2. Remove Chassis Cover Port Module 4PM InstallationPreparation for Installing and Removing 4PMs Gure 3.9.1a Removing Hassis CoverScrews hold Face Plates 1c Front View 4PM RetainingInstalling 4PM Cards in the LE14XXA-Series 2b Top View 4PM Module Installed inside a LE1416A Inserting 4PM Cards Into a LE1416A4PM Cards Switching Functionality Filtering and ForwardingAddress Learning For all LE14XXA-Series models Power LED, on when AC power is applied to the unitStatus LEDs Steady ON, Link status for 10 Mbps and 100Mbps operationGeneral information Auto-negotiation for 10 Mb ports, half- or full-duplex mode Flow-control, Ieee 802.3x standardDistanc Module Introduction LE14XXA-Series 4-Port Modules4PM Product DescriptionIEEE-specified 100Mbps shared-collision LE1421C 100Mbps single-mode FX-S C-type, snap-in connector Small-form-factor LE1425C Twisted Pair, 10/100Mb TP 4-Port 10/100BASE-T and 100BASE-FX Combo Quad-Port Connectors 10 4PM-FP Fety, etcTroubleshooting Before Calling for AssistanceWhen Calling for Assistance Shipping and Packaging InformationBlack Box Corporation

LE14XXA, Modular Switches specifications

The Black Box LE14XXA series of modular switches are designed for high-performance networking in both small and medium enterprises, as well as in larger data center environments. These switches stand out due to their scalability, flexibility, and robust functionality, making them suitable for a variety of applications.

One of the main features of the LE14XXA modular switches is their modular design, allowing for the integration of various interface cards to tailor the switch to specific networking needs. This flexibility ensures that organizations can adapt their network architecture as requirements evolve, making it a future-proof investment. The switches support a range of modules, including Ethernet, fiber optics, and PoE (Power over Ethernet), which can be easily swapped out or added to support changing technology demands.

In terms of performance, the LE14XXA series offers impressive throughput capabilities, often supporting up to 10 Gbps per port. This speed is critical for businesses that rely on fast data transfer rates for tasks such as video conferencing, large file transfers, and real-time applications. The switches also feature advanced Layer 2 and Layer 3 functionalities, facilitating efficient data routing and switching, which is essential for maintaining effective network performance.

Security is another critical characteristic of the Black Box LE14XXA switches. They incorporate a variety of security protocols, including 802.1X port-based access control, VLAN support, and secure management interfaces, which help protect sensitive data and ensure compliance with industry standards. This makes them an excellent choice for organizations that prioritize data protection and regulatory compliance.

Ethernet redundancy protocols, such as Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), enhance network reliability by providing failover options in case of link failures. Additionally, the LE14XXA switches feature energy-efficient designs that comply with energy-saving standards, which can significantly reduce operational costs over time.

User-friendly management interfaces, including a web-based GUI and command-line interface (CLI), simplify the configuration and monitoring processes. This ensures that IT administrators can efficiently handle the network without extensive training or experience.

Overall, the Black Box LE14XXA modular switches combine advanced technology, security features, and versatile design, making them a powerful choice for modern networking needs. Their adaptability and high performance offer businesses the capability to build scalable and secure networks that can grow alongside their operations.
Top Page Image Contents