CHAPTER 5: Operation
To restore lost mouse movement on a CPU connected to the Extender:
1.At the receiver’s keyboard, select the CPU that has lost its mouse movement.
2.Enter configuration mode (see Section 4.2.2) by pressing the hotkeys followed by [Enter].
3.To restore a PS/2 mouse connection, issue the [M] [6] [Enter] command. Or, to restore an IntelliMouse connection, issue the [M] [7] [Enter] command.
4.Press [Enter] again to exit configuration mode.
5.Move the mouse a short distance to make sure that the connection has been restored properly.
6.Press [Enter] again to exit configuration mode.
43